ddsbyday Posted February 16, 2009 Share Posted February 16, 2009 I have a 2001 chevy-zo6 that has 14,000 rounds on it. I purchased it with just under 10,000 M. I have had it for 3 yrs. The key fob will open the drivers door but not the passenger door. There is no keyhole on the passenger side so it makes chivalry a real pain. I checked the fuses and they are fine. The lock did not work when I purchased it. Is this a big deal to fix? Trunk and all other features work fine. Just the passenger door does not respond to the fob. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Scott K Posted February 16, 2009 Share Posted February 16, 2009 Sounds like you have a bad door lock motor, or a broken wire in the door. Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted February 16, 2009 Share Posted February 16, 2009 Or your not hitting the button twice?Does it unlock with the switch in the truck? Quote Link to comment Share on other sites More sharing options...
ddsbyday Posted February 16, 2009 Author Share Posted February 16, 2009 The lock is broken. I tried everything. It is the 2001 corvette z06. I was just wondering if this would be a dealer repair or if someone that knows their stuff can do this job. Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted February 16, 2009 Share Posted February 16, 2009 Should be pretty straight forward. There are all kinds of ways to start but I would probably pull the door panel and check the lock actuator. If its getting power/ground than its bad. If it isn't than it should be fairly easy to trace the problem with a wiring diagram and a little detective work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.