Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. 😀

  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
pj4

winney ice series

Recommended Posts

Mail-in Deadline has ended.

You have until 3 PM Thursday to be entered for the Winnie Event online for $10 at (online payment):
http://IceLeaders.com

You can also enter at the event. We're bringing extra food. We just can't guarantee we'll have enough food for late entrants if we get better numbers of folks showing up after deadline. It's $15 at Denny's.

We're meeting there at 7am to head out onto the on ice headquarters. Start time for the contest is 8am. It's ok to come late. Stop in at Denny's and he'll be able to point the way to where we're at.

We'll be hard to miss. We have 2 10x20 Carport style windbreaks and a Road King Fish house that we'll set-up.

Here is a map to Denny's (Kind of).
De nny's Map - CLICK HERE

The star is in the wrong location, but close. Denny's is North of Hwy 2 (not south like the star is). Big Sign to Denny's om HWY 2.

Sounds like we're going to have a LOT of FMers showing up at this event. A number are signing up and not posting.

The PERCH bite has been phenominal and the weather forecast is near perfect with mid to upper 20 degree temps for Saturday.

It's a warming trend and you know what happens to fishiong on a warming trend smile.gif

Hope to see you there.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • I had problems with my 02. I found that the plug on the truck side going to the plug at the bumper was corroded. I hope that made sense I cleaned it up and put dielectric grease on it.    
    • I would put some Seafoam in the ga.........................  oh never mind. 😁
    • I rode the trails around big lake today, mostly to get used to the new trails. trails were awesome, they must have groomed last night, rode to becker and back and some other playing around. all in all I put on 42 miles today. I will ride into the orrock area tomorrow. don't ride that much around here anymore, mostly aitkin co. now. looks like the trails around the sand dunes look good, I will give it a shot tomorrow.
    • I'm guessing not much. I know the one pounders threads can start to rust in a humid environment, but am not sure if that would be an issue if still attached? I know nothing about propane augers,  is there an oil tank to keep the engine lubed? And if so, does it need to be refreshed or drained every once in a while? It's not like you need to worry about bad gas gumming up the system.   Mostly,  I'm just replying to give you something to read TJ. Hopefully somebody else will chime in with more knowledge.  
    • Possibility of moisture getting into them after washing the stove top and around the burners? My wife is good at that.
    • I get it, like the woman in the commercial. You are clever. 
    • Fleet Farm currently has Kingsford 15.4lb x 2 for $8.  About the same per pound as the summer sales.
    • We have a 6 year old Frigidare gas range and the ignitors on the top burners seem to be controlled by a ghost.  Sometimes one doesn't work, sometimes another.  Any ideas?   Thanks for your time. Tom
    • Make sure the adapter wiring matches the diagram on the cover of your female plug-in on your truck too.  Some use the center pin for backup lights,  yet others it is an auxiliary.  Also make sure that the lobe on the male is lining up with the lobe on the female plug-in too.
    • Trailer, one side, brake and turns dont work, same wire, same bulb filament.  Sounds like a ground problem.  With other tow vehicles its ok.  Are these 7 pin to 4s?  Could be the wrong adapter?  Not all 7 to 4 pins are the same.  Sometimes too that bad ground seeks its path through the hitch.  
×