Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

shimano baitcasters


midwesthunter

Question

I have been looking at a couple of different baitcasters for trolling and casting crankbaits for walleyes/smallies. I have pretty much narrowed my choices between the Chronarch or Curado. Has anyone had any experience with these? And if so, which would you recommend.

Thanks

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

Both are great reels. If you are going to throw big cranks.. LIke a a DD22, or DT16 soemthing that dives down there pretty good, I would suggest the Curado200DPV, its a 5.0-1 gear ratio and those lower gear ratio helps on forearm fatigue. THe Chronarch also comes in a lower gear ratio retrieve, the 100BPV is 5.1-1... Both reels get about 21" of line per handle turn.

All that said, you dont need a big expensive reel for trolling. But when casting, the higher dollar reels are nice. The Chroarch has one extra ball berring over the Curado. and the Chroarch is .7 oz lighter.

What rod are you looking at pairing?

Link to comment
Share on other sites

  • 0

I've been eyeing both Chronarch and Curado models back and forth and because of the one plastic bushing in the Curado, I'd go with the Chronarch. I'd admit that I do like the 300DSV Curado and upgrading the bushing to a ball bearing is a personal requirement.

Link to comment
Share on other sites

  • 0

I have a Curado 200dpv on a 6'9" St. Croix ML with extra fast tip. I think it is labeled a drop shot rod. I really think this combo is fantastic. I use it mainly for bass (lots of smallies) throwing unwieghted/lightly weighted worms or senkos, small jigs with Gulp bodies, and even a simple split shot with minnow on hook up to a decent sized sucker on worm hook in the fall.

Very lightweight and comfortable, and you can toss some pretty small lures with ease. Haven't tried a Chronarch.

Link to comment
Share on other sites

  • 0

I plan on putting the reel on a St Croix Legend Tourny, 7' Medium action.

I am not a hardcore trolling person so I don't see a need for a line counter. I just want one really nice rod/reel combo that I can use for casting crankbaits and troll.

Should I be concerned about line capacity with the Chronarch 101B. The capacity is 10 lbs/130 yards. If I put 20 lb powerpro on it, it will have a diameter so I would imagine i would be able to get at least 160 yards of the stuff on there.

Link to comment
Share on other sites

  • 0

Whats to worry about? 130 yards is alot.

The chronarch has one more ball bearing, Anit-rust ball bearings, plus a slightly better drag system. Its a very nice reel.

The Curado does have a $50 rebate currently. You could almost get two curados for the price of one chronarch right now!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.