Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Anybody having any luck?


Recommended Posts

Well has anyone had any success lately? We made 4 sets Saturday afternoon...fresh tracks each time but no critters. Sunday was WAY too windy to go, and it doesn't look like I'll be out again until the following weekend.

Are you guys howling more this time of year? I have been doing more lately, but still do distress first in case there's a fox nearby. Do pup sounds work good this time of year or not 'til later?

Link to comment
Share on other sites

haven't been out for a couple weeks now. I am hoping over easter to get out and call in SE MN. I would keep howling and a distress is really never a bad idea. But I would think it is a little early still for pup sounds.....

Link to comment
Share on other sites

I believe it's a mothers internal instinct to come to a crying pup, no matter what time of year it is. had two different coyotes come into the pup cries/disstress sounds in two different spots. just my opinion.

Link to comment
Share on other sites

That's why I was asking if you guys use them. I've heard they work good this time of year but I didn't know if it would be too early or not. I figure some ki-yi's and high pitched howls would be just as good. Thanks for the advice.

Link to comment
Share on other sites

Talking with a coyote biologist, the average date a coyote has their pups in April 12th. That being said, in a week or two they are going to very difficult to call in. The females will stick around the den and not leave, and the males will just stick around the females.

Link to comment
Share on other sites

Well I finally got the monkey off my back. went out last night for some moon shootin. Just got set up when a pack accross the road started sounding off, so I gave them a sarinade back along with a challange howl. About 20 min later I spotted one comming down the fence line from the road. It finally paused for a second and offered a shot at about 165yrds my .204 sounded off with the follow of a big pop! down it went. I went right to the coyote distress. I didn't see any followers but 20 min. later I had the distressed rodent going on the fox pro and another one came from accross the road. This one tryed to get down wind of the call, it crossed the fence before I could get on it and I then proceeded to rush the shot #$@%&*!! Lets just say I gave it some schoolin on what sound not to come to.

Link to comment
Share on other sites

Glad to hear you got some action still! I missed a nice big male 'yote, which would have been my first, at about 120 yards last Sat. We howled back and forth a few times, and he let out some real long, deep howls and came running in. Didn't sight my new rifle in as good as I wanted to because of time and found out it was a little higher than I thought eek.gif

Learned my lesson the hard way but it was still a blast to finally call a coyote in. Hoping to get out a couple more times before all the snow's gone!

Link to comment
Share on other sites

I have the browning a-bolt .204 with a nikon 4.5x14 I shoot the horanady 32gr. v-max. last year I shot 5 coyotes with it and all had minimal pelt damage well except for one that I hit high in the shoulder this one did have a big hole in it. The one I shot just the other day has no exit hole the v-max comes appart very nice for maximum internal damage. I did pick up some 40 gr. for coyotes to see if there would be any difference but haven't shot them yet. Its hard to switch something that works so good.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.