Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Marcum Technologies Camera Compass - A Close Up Look


Recommended Posts

compass1ao0.jpg

One of the most frustrating duties after lowering my underwater camera to the desired depth, for me, is securing the camera cord in a solid position. Frequently, one slip as the camera nears the bottom of the lake, sends the camera to the bottom and up comes a cloud of silt and floating debris, making a mess of the view on the monitor. I'm on my second season of using Marcum's Camera Compass and even though it's a small accessory, I think it's a valuable one to have. Here's a quick look.

After placing your underwater camera in the ice hole, simply slide the camera's cable into the slit of the Camera Compass. Now, position the Camera Compass over the ice hole. The camera's cable slides freely through the slit of the Camera Compass and steadies the deployment of the camera, since you can now rest your hand directly over the ice hole. Once the camera is at the desired depth, simply route the cable around the cleats of the Camera Compass and you're done.

compasscableqq4.jpg

If you want to rotate your camera's viewing direction, use the built in finger grips to rotate the Camera Compass. The camera depth setting remains constant and the camera doesn't wander back and forth.

compassadjustej7.jpg

Marcum's Camera Compass isn't just a piece of plastic, take a look at the bottom. Even an accessory such as this is designed with strength for a reason.

compassundersidenz8.jpg

The Camera Compass covers the ice hole so you can even walk around without fear of stepping in, or dropping gear, into the otherwise open ice hole. The CC measures almost 11-inches so, it can be used above 10-holes as well.

compassbootse4.jpg

At times, I'll use another Camera Compass to hold my bait bucket under the ice, too, keeping my minnows fresh and healthy. For a small chunk of change, this is a pretty versatile piece of gear that I thought you'd like to hear about.

Contact

Marcum Technologies

[email protected]

763-323-0456

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.