Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Questions on Fish House Purchase


woody1975

Recommended Posts

We are looking into purchasing a fish house after we sell ours at the end of the season. We would prefer a 6.5' x 14' v-front and we prefer to finish the interior ourselves. I am sure that plenty of people have done this, but I am wondering what kind of fish house you purchased (Ice Castle, etc) and who got the best price? Who was willing to work with you most? What kind of heater did you go with?

Any advice would be appreciated.

Thanks ,

DL

Link to comment
Share on other sites

woody, I too went through this whole...where should I get it, what kind is best, what layout works best, all the questions. I found many who were great dealers or manufacturers to talk to, but then I found one I was very comfortable with and trusted completely. shoot me an email and I will talk to you more, but I feel your pain. It was the same way for me a couple years ago when I bought my new camper. UHHHHHHGGGGG!!!!

[email protected]

Link to comment
Share on other sites

I'm in your same boat. Originally I was going to purchase the frame, and finish it up myself, but I want a smooth aluminum exterior, and I'm not doing that project on my own. The Soderbloom fish houses seem to be an incredible value, and are all aluminum. They have spray foam insulation, which in my opinion is very important. From what I've gathered here, a fully finished 6 1/2 x 16 house will come in at just under 2,000#.

If I were buying my own frame, it would be the Tundra from Fish House Supply.

Link to comment
Share on other sites

woody, I won't get to it till after work is that fine? or you if you want you can post your email, and I can contact you right away. I can't access my yahoo mail from here, just at home.

Link to comment
Share on other sites

I own a Soderbloom house. It is a 8 x 20 "V" front.

I finished it by myself. The ones they are building now are more heavy duty than mine. It was the first and maybe the only 8' he made. I made it realy fancy, Knotty pine interior, 4 bunks, kitchen w/stove and microwave,two tv's, bathroom. etc.

It got a little heavier than I planned, but not to heavy. There are only a few things I would have him change.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.