Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

An HDTV question


LwnmwnMan2

Question

I really can't believe I'm even asking this... but...

The wife, yes the wife, watching QVC, YES QVC, has decided we, yes WE need a new flat screen TV!!!

The special of the day or whatever was a 46" Sharp Aquos.

My question is not going to be what TV is the best, that'll be determined with our own taste and research.

What I'm wondering is, is there any way to hook up the surround sound wirelessly?? If so, how about the satellite dish?? Where the wife, and I, would like to hang it, is on a "fake" wall that separates the kitchen / dining room area from the living room in the upstairs of a 70's style Wausau split house.

It's a wall that goes up about 10' in an area with a vaulted ceiling of about 12'. Also, there's no part of the wall that touches an outside wall.

The basement is completely finished off with sheetrock / tongue and groove on the ceiling.

I know of the easiest, most likely way to run the satellite cable, but are there other options?

Thanks.

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

Is there any unfinished area in the basement? You would be suprised as to what and experienced residential electrician could fish in to that area. If it is within 20 feet of an open area in the basement it would be a piece of cake to fish in.

I just reread your post, built in the '70's, probably solid floor joists huh? Makes it harder, but not impossible.

Link to comment
Share on other sites

  • 0

Yeah, solid joists.

The closest room that's doesn't have a finished ceiling is the utility room, and that's about 15' from where this wall that we're wanting to hang the TV on, is.

It's about another 30' of wire to run from the satellite dish, so we're getting up to around 100' or so if we run it this way.

I think the best thing, would be to run the satellite wire where it comes in, in the basement, along the wall, then up and along the backside of the ductwork (no one will see it there) and then just drill a hole straight up below the fridge and run the wire through the backside of the wall.

I can then get the wire to the sound, and then run the wires back through the wall and up the the TV and back in behind it there, all behind the fridge.

Link to comment
Share on other sites

  • 0

Nope, laminate wood.

Just put it in last year.

I suppose I COULD pull up the part in the living room, and then run the wire, and relay it, but that's going to be a hassle in itself, even though all the wires would be run in the floor.

Link to comment
Share on other sites

  • 0

There is a way of running wires without exposing anything, it's called "Wall Fishing". It's not something I'd reccomend but if done correctly, it will look wonderful. I've done quite a few wall fish myself, being a former cable installer, I would be able to give you a few pointers or even assist you in the project.

If you have laminate wood, it should not be too difficult versus sheet rock.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.