Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

sorry: not a hunting question.


Recommended Posts

You could look under Equipment forum as well. I would start checking the wires. I have a swing away tounge and it pinched some wires so it was an easy fix. Check the main connection where it hooks to your truck as well. It can be a lot of small things, but put some time in and save some money. Also, get a tester and check what's coming out of your truck. I've had the adapters that go from round to the 4 pin go bad on me and that's just a $10 fix.

Link to comment
Share on other sites

if everything went all of a sudden I would start with the ground! If that goes nothing works. Check your wires before you spend the dough to replace it all. I think you can get a set of lights and wire for like $60 for the whole kit at Fleet if that is what you need to do.

Link to comment
Share on other sites

I just replaced the wires for one of my boat trailors and I got the kit at Fleet Farm for 10$. Just make sure you cut your old wires at the adapter and tie your old wires to your new ones, then pull the new wires through. If you don't you will only make that mistake once. It is a pain in the rear to try to feed the wires through the tube. Also, mark where your wires currently connect if the lights are like mine there is more than one option.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.