Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Tip ups for walleyes?


Carp-fisher

Recommended Posts

Hi all,

This year I'm planning on always having out a tipup rigged for 'eyes. I'm thinking of something like a 8 to 10 pound fluorocarbon leader with a large fathead dorsal hooked on a jig head. This all of course 12 to 18" off the bottom. Any general tips on walleyes on tipups?

Link to comment
Share on other sites

I would start out with an HT Windlass tip up. Kind of does the jigging for you in a good wind. Most of the time I will run a dropper rig off a spoon or blade. My walleye tip ups have the 30 lb Power Pro, a lil thin, but plenty strong. If I was going to do it again, I would go with the 40 lb, because of the 10 lb diameter. From there I have used both 8 and l0 lb vanish leads.

Link to comment
Share on other sites

Hey Carp,

You and I are thinking along the same lines! I plan on having a tip-up set up with 20 lbs of plastic coated dacron and put a 6lb fluorocarbon leader on it. I also plan on having a deadstick setup using a Jason Mitchell "Meatstick" rod. So between the two setups I'll have a couple options while I am working my walleye jigging setup. We'll have to get after some of those eyes this year, eh?

With the tip-up, I want to be able to switch over to a quick-strike rig for pike. Something for Lucas to do if I bring him out, and I also want to pickle some pike this year.

Link to comment
Share on other sites

A couple of thoughts:

1) I like to keep a set line close to me when jigging. I believe that the jigging is what attracts the fish, and if they're not interested in my jigging presentation they often go for my set line, which is close by. If I move my tipup out quite a ways from where I'm jigging the only fish that are likely to hit it are ones that happen to be cruising by.

If you go with the windlass setup most of what I said above is null and void, but you aren't offering walleyes the stationary bait either.

2) With that said, if / when I set a tipup for Walleyes I usually use a smaller gold kahle hook with a fathead, and have it set near the bottom, for sure within the bottom 6". A gold kahle hook and enough splitshot 1-2 feet above the hook to keep the minnow from swimming too far.

My 2 cents anyway...

Good luck!

marine_man

Link to comment
Share on other sites

In SD we can have four lines in the water I will typically set a tip up on each side of me and two jig sticks reltively close to each other. One tip up with a plain red hook and one with a forage minnow or similar. I actually have 8 tipups rigged with differnt setups that I will try throughout the day. If i start getting bites on one setup I will switch my jigging poles to that. Depending on the lake I will set up 2 inches to 2 feet off the bottom. I will also periodically jig my tip ups often resulting in a bite. I prefer plastic coated lines and a 8 pound mono leader that is about 5 feet long.

Link to comment
Share on other sites

Calvinist:

We always use tip-ups for walleyes. I prefer the beaverdams but you also need to use a round "plate" to block light if fishing in the shallows (10-12ft). Here's how I rig mine:

I spool 25 yds of inexpensive dacron, then attatch a snap(not the swivel just the snap). I then make walleye snells from 10lb fluoro. The snell is tied with a swivel on the end. This allows quick changes of color or to quickstrike rig. You just have a bassackward snap swivel when joined.

We use the heavy depth bomb to set the depth with a tiny bobber set to the bottom of the tip-up spool and keep the shiner~ 6 inches off the bottom. The little bobber acts as a depth stop for resetting the Tip-up after a fish. just reel up to the bobber, re-bait and your fishing again.

good luck.

Link to comment
Share on other sites

I usually use 30# tip up line,with a fluoro leader about 2' in length,rigged with a small split shot or two, a red or green glow hook,a small colored bead or two,and maybe a small flicker blade. Fathead or small shiner,within 6" of bottom

Link to comment
Share on other sites

I use the Frabil wood style tip ups. I used to swear by the thermo tip ups that cover the hole, they do work good for keeping the hole open, but for some reason I only use the wood style ones now. I also use the small bobber trick as a stop for reeling in and quickly getting back to the same depth. But I do use 30# dacron and 15 pound floro for a leader.

Link to comment
Share on other sites

Quote:

A couple of thoughts:

1) I like to keep a set line close to me when jigging. I believe that the jigging is what attracts the fish, and if they're not interested in my jigging presentation they often go for my set line, which is close by. If I move my tipup out quite a ways from where I'm jigging the only fish that are likely to hit it are ones that happen to be cruising by.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.