Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Puppy questions


Big Dave2

Recommended Posts

We just brought our new 7-1/2 week old Brittany home on saturday. It's been so long since we have had a puppy in the house that I have a few questions to ask.

The 1st night we had her she whined for about a half hour when we put her in her kennel at night, but then quieted down. We left her all night and she whined once in the middle of the night (that I heard anyway). When we woke up she had wet and [PoorWordUsage]ed in her kennel. I think that was just too long to go for her little body so last night when she whined (which was about every 2 hours)I took her outside to do her things. She did not have any accidents in her kennel. Should I find a happy medium between these 2 techniques? How long can a young pup like this go without going out? How about if I just got up once in the middle of the night to let her out?

Also I was wondering, What do most people do with thier new pups during the day when they go to work? I have the luxury of bringing her to work on the days that my wife is not home so it works for me but what do most people do?

Link to comment
Share on other sites

I bought a paper shredder and between bills, junk mail etc. I had enough to keep my pups' kennels fresh. If they mess it really wasn't too big of a deal because the paper would absorb it or burry it a little bit so the pup wouldn't get too messy if at all.

Every 2 hours for a 7 1/2 week old dog seems about right. I had been told the a dog should be able to "hold it" for about an hour for every month old they are. So your pup should be able to hold it for 1 - 2 hours. I am not sure how accurate that rule is but it seemed to hold true for both of my dogs unless they were sick. You may want to try to limit the pups water later in the evening so you can get some sleep grin.gif

WHOOPS I read that as 7 1/2 months! My bad, your dog is doing fine.

Link to comment
Share on other sites

I read that as a rule they can hold it one hour for every month old they are so you 7.5 week old puppy should be holding it every two hours.

When my pup was that age, I set my alarm every two hours and would take her out whether she was whining or not. I kept increasing the time, especially when she was sleeping hard until finally it was all night. At about 4 months she was sleeping most of the night on most nights. It also helped when she was really tired so I would run with her or take her to the park before bed and keep her running all day.

Link to comment
Share on other sites

It takes a puppy 12 weeks to gain full control of it's bladder and another week or two for it's bowels... the 1st 3-4 weeks you'll be gatting up and letting the pup out a fair amount.... I'd say 2-3 hours is about right and you'll be able to extend it a little bit as each day goes by.

As posted they are usually darn near perfect by 4 months of age.

Good Luck!

Ken

Link to comment
Share on other sites

Hunter was fully potty trained at 10-11 weeks, both day and night.. he goes out at midnight and doesn't go back out till 7-8 am.. during the day he goes out everyday 2-3 tho.. Hunter went once in his crate, and i cant blame him for that. Your supposed to get a create that fits your puppy then get another later, well i got a folding crate from FF in Rhinelander wis its a x large one, so theres so much room for him in there and thats why, they say a good dog wont use the bathroom where they sleep..dont if thats true..

Link to comment
Share on other sites

Kennel the dog when your at work.

After a pups drinks it'll pee soon after. Get it out the door before an accident happens. (See my post on "dog won't range") If you let it pee in the house then it thinks thats where is supposed to pee. Bring it to the spot you want it to go. He may or not pee when you let it out, if he doesn't then you'll be letting it out again very soon. With a new pup I wouldn't go more then a half hour before I put it outside. Might seem too often but its a lot easier then cleaning up the carpet. Reduce the accidents inside and the dog will learn that much sooner.

Last thing a dog wants to do it crap where it sleeps but we're talking a pup here. Don't give it water or food before bed time. Just in case the pup wets in the middle of the night, you can buy a floor mat thats about 3/4" think with holes in it. The pup will be up off that floor and won't be laying in pee. Crap is another thing, I think the shedded paper would work well there.

Link to comment
Share on other sites

Thanks for the replies, guys. She actually does wonderfull with going EVERY time we take her outside. I think she will be house trained in no time.

Last night she didn't need to go out until about 2:30 in the morning and not again until 6:00 am.

Thanks again to all for the input. I was not aware that the rule of thumb is that a pup can hold it for 1 hour for every month old. That is good to know.

Link to comment
Share on other sites

I have built a 4' X 6' pen with 2X2's and some fencing. I put wood chips on about 18 inhes of one end and block it with a board to keep it semi-neat. This rig goes in the garage. The dog will [PoorWordUsage] and pee in the chips and you can clean it fairly easily. I'm too old to get up at 2 a.m. so my dog can do his thing. Water and food in the pen as needed. Added bonus is taking the rig apart and using the 2X2's for the frame of the dog house. The dog spends the night there, days if I'm at work.

Link to comment
Share on other sites

It has been a while since I went through the puppy stuff, but I think this worked for me:

1) Kennel size is important - small but not cramped. You will need a bigger one as she grows.

2) Make sure she goes outside just before bed time. Then, like when you had little babies, get up and let her out about 3:00 am. This routine will gradually go away as she gets older.

3) Whining suggestion option #1 - place one of your old shirts in the kennel with her at night. Your scent from the shirt will help with her separation anxiety.

4) Whining suggestion option #2 - get one of them hollow bone chew toys and jam some peanut butter into the center. This will keep her busy until she falls asleep at night.

Patience, consistent routines, positive reinforcement and lots of praise will get your young pup on the right track. Britts are soft and very intelligent, and they are quick learners.

Link to comment
Share on other sites

Ok and i know a guy who took a baby monitor and strapped a rubber band around it so it stay keyed while he slept, he snored and stuff and he put the receiver near the puppy and the puppy heard him and slept and didn't whine..

I was very happy when i got Hunter he went right in his crate and didn't do the puppy whine at all.. but i think that had something to do with how he was raised too..

Link to comment
Share on other sites

Thanks everyone.

As it turns out, she has a little problem with stomach worms right now, so we have had to adapt and take her out more often.

She is doing great though and last night she went into her kennel without crying at all!

Once she gets over her little problem, I think she will be a breeze to house train.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.