Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

03 silverado steering ?


fish2live

Question

i am feeling some feed back through the steering wheel. my buddy thought by tightening the steering box may help. i checked all the steering components for play and were all tight. so i checked to see how much play there was until it started to turn the wheels while truck was off i had about half a turn of the steering shaft that connects to the steer box so i tightened it till i had a quarter turn. i ran into someone else that told me by doing this on my own if i get the box to tight it will burn the steer box out in no time.

so here is my question is this something i should not worry about or should i bring it in to a shop and have them adjust the steer box for me? i have already tightened it up, i am wondering does it have to be exact or is there other adjustments that need to be made also?

Link to comment
Share on other sites

11 answers to this question

Recommended Posts

  • 0

Are you feeling a clunking or rattle while driving at slow speeds? This is the legendary intermediate steering shaft problem that has been in existance since 1999 when the new style Silverados came out. I've had four trucks since then, both 1/2 and 3/4 ton, and they've all done it. At one time there was a so-called fix where they repacked the grease in the shaft and that did cure the problem....for a while and then it came back again. I think they have another "fix" now but not sure if that was the cure-all or just another temporary band-aid.

Not sure about the adjustments you made, but if you're experiencing the symptoms I mentioned you aren not alone. Try to take it in to the dealer and ask about the intermediate steering shaft TSB. I don't know one person who hasn't had this problem, and if they say they don't they will eventually as they ALL do it....that's why there is a TSB on it. wink.gif

Link to comment
Share on other sites

  • 0

My intermediate shaft started clunking in May. I brought it in over a month ago and they replaced the shaft with a new and improved shaft. wink.gif This is the "latest fix". The cost with labor was about 175 bucks, give or take a few. Trucks been like new since. My neihbor had this happen to his truck twice. They just repacked with grease on his. Good luck, Junkky.........

Link to comment
Share on other sites

  • 0

Bring it into the dealer, there is a service bulletin on it. I had the same problem with my 2004 GMC. I can not remember what they needed to do to it, but it took care of the problem. I had it done under warranty, so not sure they will cover it if your outside your warranty, but its a wide spread problem and I would think they would fix it for you.

Link to comment
Share on other sites

  • 0

I'm pretty certain my 05 came with an intermediate steering shaft problem off the lot. Loose, and clunky steering from the get go. I brought it back to Stillwater Chevrolet shortly after purchasing it. They couldn't find any issue is all I got back from them.

Seriously, I told my wife to bring it in this morning because she has been saying it is more clunky lately, and guess what, they want us to pay $200. 05 with less than 45K - out of warranty?? Dillholes.

LB

Link to comment
Share on other sites

  • 0

Blueroof-

Call Chevy and complain- It does work. Its a known problem, they should at least split the cost with you. They did that for me when I had my 98 and the air went out in 2001. Late 90's Chevy's were know to have bad air conditioning systems and they finally covered 1/2 the bill. It won't hurt to try it. But your right, they should fix it for free.

Link to comment
Share on other sites

  • 0

If you run into dead ends, have dealer Road Force Balance tires. You may have a tire concern.

I read no mention of a clunk in your first post. If every thing is tight, I would at least rotate tires to cross that off your list or did this start after a rotate?

Tires can cause a lot of goofy stuff. This is the cheapest starting point with less effort. After rotate and feeling in steering wheel goes away, go get tires road forced balanced. This will correct the concern.

By me saying rotate, rotate tires front to back and back to front. Try this and see if it does any good for your concern.

I can not tell you how many people I helped out over the years that it just ended up being "Tires". With no mention of a clunk and a sensation feeling in steering wheel, this would lead me to believe tires.

Good luck!!!!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.