Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Sighting in a new scope

Sportfish1850

By Sportfish1850
in Hunting

 Share

Recommended Posts

Sportfish1850 Enthusiast

Sportfish1850

Posted
Posted

Where do you guys on the north side of the twin cities like to go for sighting in a new scope on your deer rifles ? We live in Anoka county but don't mind driving a few miles if necessary. Looking for a place thats got a comfortable shooting area and bench to work on, and helpful people that can give a guy who's not exactly a gunsmith some help if necessary. Will be sighting in a new scope on my 30-06 and a new scope on an SKS. Looking to sight in at about 100 yards. Thanks for any advice.

Link to comment
Share on other sites
JDM Community Regular

JDM

Posted
Posted

Go to Forest Lake Gun Club. They are open until 4:00 everyday, but don't take anyone after 3:00. It is very nice! $12 per gun, but well worth it. 25, 50, 100, 200, 300, 400 yard targets. The turn is off of Broadway right before you get into Forest Lake. There is a sign, or call for directions. Good luck.

Link to comment
Share on other sites
nitroant Community Regular

nitroant

Posted
Posted

I don't think Metro Gun Club has a rifle range, just trap and skeet areas. I was up at Forest Lake on Saturday. Plenty of people around to help if need be. I was already sighted in from a few years ago, but just wanted to be sure it was still on. Plenty busy, but didn't have to wait long. I believe a dirty barrel(gun powder) shoots better than a one with oil in it.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • rundrave
      Problems with Yetti

      By rundrave · Posted

      got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • Macgyver55
      Random Daily Pics

      By Macgyver55 · Posted

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept