Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Labradoodles


kingr

Recommended Posts

Has anybody hunted over a labradoodle? I need a dog, but the significant other is allergic to them...so I'm making an effort to compromise as much as I can. This is the only breed that will have a chance to get in the house occasionally. Thanks

Link to comment
Share on other sites

I would bet they'd be ok being that poodles were orginally bred to be hunters. Mix that with a lab and they might be good. Although i'm not in favor of the breed. I see breeders selling these "mutts" for $5-600. Can't see myself spending that much on a mix breed. But, whatever works i guess.

Link to comment
Share on other sites

If she is truly,medically, certified to be allergic to dogs then she will be allergic to ANY dog. Please don't buy one....of any breed.You'll be doing some poor little puppy a real favor and sending him/her on to a good home.

Perhaps you might want to buy a nice tiger.

Link to comment
Share on other sites

Most animal allergies aren't to the animals themselves but to the dander(dead skin, dust mites, dust, etc.) in the animal's fur. If the dog is bathed thoroughly a couple times a week, animal dander allergies should be in check. I'm no allergist and I don't know the extent of the animal allergy that each person has. I do have seasonal allergies and some food allergies and I've found the best remedy is to "tough it out" til your body adjusts to the allergen. I used to get shots(which are doses of allergen, to get your body used to it) and take Rx and OTC meds. The past two years I've done nothing and this year my allergies were almost non-existant. I have a friend who is allergic to cats and I have a cat. He says that even though his eyes itch and he gets sneezy when he comes over, it's not as bad as a few years ago. I let him suffer because I'm not even going to try and give my cat a bath wink.gif

Link to comment
Share on other sites

Hey Kingr,

The Wirehair Pointing Griffon's is another option for you, plus they are a true hunting breed & not a mutt. There is a breeder in your area his name is Mark Drexler & he lives in Duluth. He also goes by Double Griff here at FM. He was possibly going to have some pups on the ground in Nov. a repeat breeding from last year which was the litter I got my pup from.

My best suggestion would be to call him up & take the better half over to meet the dogs & see if she has a reaction to them before comitting to a pup. The Griffon's have hair not fur & are non-shedding dogs. My buddy is allergic to dogs also & he never has reactions around the Griffon. So this might be a better fit for you if your looking for a hunter.

Marks number is 218-310-7156 give him a call.

Good Luck with your search for a pup.

Chris

Link to comment
Share on other sites

Quote:

Hey Kingr,

The Wirehair Pointing Griffon's is another option for you, plus they are a true hunting breed & not a mutt. There is a breeder in your area his name is Mark Drexler & he lives in Duluth. He also goes by Double Griff here at FM. He was possibly going to have some pups on the ground in Nov. a repeat breeding from last year which was the litter I got my pup from.

My best suggestion would be to call him up & take the better half over to meet the dogs & see if she has a reaction to them before comitting to a pup. The Griffon's have hair not fur & are non-shedding dogs. My buddy is allergic to dogs also & he never has reactions around the Griffon. So this might be a better fit for you if your looking for a hunter.

Marks number is 218-310-7156 give him a call.

Good Luck with your search for a pup.

Chris


Chris,

Just wondering if you have any first hand experience about the allergy thing with the wirehairs? I have heard this also but not many people seem to talk much about the wirehairs being better for allergy sufferers. I am thinking hard about a griff also. If they would be better for my allergies that would seal the deal.

By the way, how is your pup doing? Did you take him out hunting yet this year?

Thanks,

Dave

Link to comment
Share on other sites

Now I don't know if there is any kind of scientific evidence to support this but I have seen it first hand and was told by my vet, that sometimes two dogs will offset the others dander and sometimes make those that would normally be allergic, have no reaction at all. My wife never reacted to my dads dog until his other one died. now I own my dads dogs sister, and my wife has never had a reaction to her, (we have two dogs). Like I said I don't know if it is coincidence, but my vet did verify that he has also heard of this....

Link to comment
Share on other sites

Quote:

Now I don't know if there is any kind of scientific evidence to support this but I have seen it first hand and was told by my vet, that sometimes two dogs will offset the others dander and sometimes make those that would normally be allergic, have no reaction at all. My wife never reacted to my dads dog until his other one died. now I own my dads dogs sister, and my wife has never had a reaction to her, (we have two dogs). Like I said I don't know if it is coincidence, but my vet did verify that he has also heard of this....


Thats wierd! I've never heard of such a thing. But then again, there's a lot of things that I don't know.

Link to comment
Share on other sites

BigDave,

The pup "Rudy" is doing great. He is now 18 mo. old. We went out yesterday & downed 1 rooster. Missed plenty of them also! shocked.gif He is just starting to figuring out the wild birds they are moving alot now that they have been pressured. But he is catching on to tracking them when they are on the run. All in all we had about 12 points yesterday with 85% of them being hens. Just couldn't shoot the roosters that did get up due to trucks coming down the road or other hunters crowding me mad.gif

Later,

Chris

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.