Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Pup in garage


Dahitman44

Recommended Posts

We built a new house a couple of years ago but i was not smart enought to put in floor heat. The garage is attached to the house and is insulated on the walls and ceiling The pup will stay in the crate during the day and at night. (The Wife's decision) frown.gif

So -- what can I do to keep it warm in there for him? I thought about putting some 2x4s on the floor to keep the crate kennel off the concrete. Any other ideas?

I thought about the heated bed, but I am afraid he will chew on it.

Thoughts?

Link to comment
Share on other sites

Put some type of cover over crate. Garages aren't good for dogs in winter. Dogs keep warm from body heat generated. A garage is much too big for a dog to heat up with body heat. A good insulated dog house is fine in winter. Put in straw or whatever your choice is and a dog can warm the inside of dog house easy. I have one of those pet porter covers from cabelas. It works well..as i said, try to cover it at least. If you don't have an outside kennel or barrier for dog, maybe you can find a used dog house or buy one of those igloo type and put that in garage.

Link to comment
Share on other sites

I bought a insulated, heated dog house with a swinging door from some company in Nebraska. It works great! Try a web search for heated dog houses. Well worth the money.

Your wife and my wife must know each other.

Link to comment
Share on other sites

Boilerguy has pretty well got it-get the crate off the floor. Actually, those fiberglass things are colder than hell, so any old wooden house would be better,not TOO big. Toss in some old blankets or a nice old Eddie Bauer down sleeping bag and that rascal will stay warm as toast. Mainly, get the house UP off that concrete floor.

Have you seen those new Puppy Jammies from Orvis? Got little duckies on them. Made of flannel. Warm and cute! HA!

Link to comment
Share on other sites

A friend of mine built a doghouse with pink foam insulation in the floor,roof and walls w/ wood paneling/plywood over to keep the hound from chewing on it- then throw in an old sleepin bag and it looked spretty comfy, prolly going to do the same w/ my dog. My dad always said that and 60W light bulb kicked off enough heat in a doghouse to keep pup warm but sometimes they huddle too close and burn their fur, now I see some hardware stores sell a black (plastic?) shroud to go around the light bulb made just for dog houses, I smile.gif bet a search on the net might find sumthing good.

redhooks

Link to comment
Share on other sites

have made several dog house inside garages with outside thru wall entrances. We have done the floors with plywood with a layer of blue foam and then another layer of plywood. Ceder chips a few inches deep makes a good bedding and easy to change out and keep clean. Big thing is get it off the floor the concrete will just pull any heat away from the house. Have not had any of the dogs complain yet grin.gif

Link to comment
Share on other sites

Last year I had to move my dog to the garage from the house.(age) I built a wood box out of 2x4's and plywood. Had it about 2 inches off of the concrete and made it to fit under my workbench. It had three sides and insulation between the back and the outside wall. Framed over the top and went to fleet farm and bought a heat lamp for around $7. Put an old comforter in for bedding and the dog stayed warm and comfortable all winter. Just make sure the light is low enough to provide heat but high enough no to be bumped.

Link to comment
Share on other sites

Could make the ol' lady sleep out there for a night to show her it's not real comfortable wink.gif Then again,you'd probably both(you and the pup) be out there grin.gif.All joking aside......make sure it is WELL insulated and OFF the concrete. I had a friend as a kid who's dad had an "outdoor" dog,key word in that sentence is "had". Doghouse wasn't as insulated as he thought(for our MN winters) and the poor girl froze one night:( I have NEVER forgot that,probably never will....and that was almost 30 years ago.What about the basement??? I have my labs kennel in our laundry room,out of the way.

Link to comment
Share on other sites

Dee --

Two good ideas -- one would get me a certified letter in the mail.

Yeah, we have carpet downstairs and she doesn't want that either.

It rarely gets below 30 degrees in the garage maybe a few days last year, not much.

Link to comment
Share on other sites

Great points made by everyone. Thanks for all of the good ideas.

I like the ideas of raising the kennel off of the floor. and putting a cover overit and blankets inside. All good ideas.

I may consider the larger kennel idea in the garage as well with a dog house. It is an idea.

Thanks.

Any other thoughts would be great.

What about putting one of those heat beds under the kennel -- would that work?

Link to comment
Share on other sites

I think you owe it to your dog to put a run either inside or outside the garage... Correct me if I'm wrong, but it sounds like you plan to crate him during the day when you are at work and again through the night...? Even a 6x6' or 4'x6' chain link run will allow him to stretch his legs and move around. SOmetimes this little bit of movement is enough to get the blood moving again.

I guess I don't have a problem with 'kennel' dogs (mine are), but over 50% of your existance in a crate? (8-10 hours/day during work, 7-8 hours at night sleeping) That doesn't sound like much of a life....? I think you should re-think this and get a run made for him. I've even had to have 'crate' dogs before... but they are never in their crate for more than 3 hours at a time, and it is usually because of a circumstance that is no more than a couple of weeks long.

Good Luck!

Ken

Link to comment
Share on other sites

I bought a cheap paper shredder and I put shredded paper in my dogs crates. It was great when they were pups because if they had an accident I would just scoop it out and there was hardly any mess in the crate or on the pup.

For your situation I think it would act as good insulation for the dog to lay on. When it gets stinky or wore out recycle/burn/throw it away and put in new stuff.

It was nice to see the puppy [PoorWordUsage] on the credit card offers that came in the mail grin.gif

Link to comment
Share on other sites

I work outside and whenever I have to work on cold concrete, I look for a piece of 2" foam. It's the only thing that seems to be an effective thermal break.

My garage is fully insulated and I don't think it gets too cold to keep a dog out there. If I were to keep a dog out there full time, I would definitely build him a run inside of it.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.