Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

pellet stoves


knoppers

Question

was thinking of replacing my wood stove for a pellet stove at my cabin. any pro's or con's on these pellet stoves?

I will primarily burn wood pellets, but it will also burn corn.

my plan is to run the exhaust out the old 6 inch wood stove pipe, with a 6 inch down to a 3 inch converter.

Link to comment
Share on other sites

5 answers to this question

Recommended Posts

  • 0

I don't know much about them, but my buddy has one at his cabin, which is a mobile home. It only takes a minute to start and that baby throws some major heat. The only problem I notice with his is that during the night the "chute" that drops the pellets onto the flame will sometimes get clogged. And depending how long its been clogged you may need to restart the fire.

Link to comment
Share on other sites

  • 0

I have a pellet stove in the lower level of my home as a back up heat source and love it!I'm not sure if you are going to be able to use the 6" pipe tho as the exhaust is power vented by a fan and I dont think that it would have enough power to blow out the larger pipe. I think that you will have to change it all over to the pellet stove pipe. Be sure and get one that is easy to get the ashes out of and easy to clean

Link to comment
Share on other sites

  • 0

knoppers - check into Bixby stoves. They are corn burners - not sure on pellets? They are locally made (Rogers) and I have heard nothing but rave reviews of them in terms of heat, efficiency, and ease of cleanup. They kick out a hockey puck sized chunk of packed ash twice a day when running constantly.

Check 'em out. From what I'm hearing, you won't be disappointed.

Blaze

Link to comment
Share on other sites

  • 0

I have quite a bit of experience in different models of corn stoves. Im burning a couple right now. I prefer corn over pellet. Im paying about 6 cents per pound of corn. And its available all the time where pellets are sometimes hard to find. As far as venting the stove, you should line the existing chimney with a stainless liner that is properly sized. Feel free to email me if you have questions. [email protected]

Link to comment
Share on other sites

  • 0

thanks for the reply's, I still am undicided on what to get. I have been to many websites and looked at many models. I may wait till spring since I still have plenty of split wood for the fall and winter.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.