Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

*** Boat Advice Needed***


PikeBayCommanche

Question

Now that open water is on the last push for the year. I have to start thinking about what kind of boat I want to trade up to this winter.

I have a Ranger Bass boat right now and when I got it I didn't have a place on Pike Bay. Its fine on some days but anyone who fishes the Cass Lake area knows that there is sometimes a little North wind shocked.gif.

I am thinking of getting a Ranger 620 DVS or a Triton multi-spiecies boat.

Wondering what experiences people on here have had with such boats.

smile.gif

Link to comment
Share on other sites

5 answers to this question

Recommended Posts

  • 0

Both are very nice boats. I like the layout and little extras the Triton offers. Find someone with them and take a ride. Base your decision on what YOU like and need and what you can afford. What many people like in a boat you may not.

Link to comment
Share on other sites

  • 0

I've been in 2006 Ranger 620 and a 621 over the summer and fall. I'm planning on owning one in the next few weeks. The ride is outstanding, fishes great for walleyes and bass and it fished and rode very well in a very solid walleye chop. They both had 225HO E-Tec's. Great boats.

Link to comment
Share on other sites

  • 0

O.K. PBC... enough is enough! We gotta meet up when you are at Cass next time.

1st off, there will probably be a fish or two to catch yet.

2nd off, we can probably find time for an adult beverage.

3rd off, I'll take you for a ride in my Triton to see if it fits your bill. There are many days on Cass where I'm the only one on my block who will go out and fish... Going from Aluminum to glass (especially w/ Tritons hull) has made my decision to fish or not much easier! I have the 205 multi species w/225... As you know owning your Ranger, you can never go wrong with one of those either... Comes down to which is the better deal when you are out shopping. I decided I would buy the 1st 'great' deal I came across between a 620 and a Triton 189 or 205.

Good Luck!

Ken

Link to comment
Share on other sites

  • 0

pike. either way i think you'll be happy.( course i'm a ranger guy!! grin.gif) i sold my ranger bass boat( 1988, 18' 364) a few years ago, and bought a 680 C( 1990 17' fisherman series!) and can't be happier!soo much nicer in rougher water, even though mine is only a 17 ' and narrower than the new ones.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.