Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

New lawn questions


Scoot

Recommended Posts

Fellas,

We built a new house last summer. Didn't get a lawn in before things froze up in the fall. I installed a sprinkler system this spring/early summer- I finally got that finished a week ago. I then sprayed it and killed the few weeds I had. Since then I finished the final grade work, seeded (just broadcast seeded it with a little hand seeder), and packed it with a lawn roller.

Here are my questions:

1) Can I still use Roundup on the lawn for a few days? I know Roundup has no direct-contact residual, but I also am aware that the chemical can spread by translocating through the roots. I'd guess I'm done with Roundup??? Just to be clear, the seed was put in on Sun (four days ago) and I don't expect to see any grass poking up for a while.

2) I did nothing with any fertilizer. Should I have? I imagine I don't need to, but doing so would help things along? Somebody tell me I don't need to worry about it so I don't feel obligated to do this.

3) Anything I should do with the lawn for now?

Link to comment
Share on other sites

I would stay away from using any Round up now.

I have always used a starter to help it get going but you can do that at a later date.

I would just make sure you dirt is kept damp with watering if the rain stays away.

Depending on what seed you used your grass could come up shortly or be a week.The better grass always seems to take a bit longer.

Link to comment
Share on other sites

Yep, you're done using roundup for good now. Since the seed's laid already and will be sprouting in a few days, you'll have to wait with weed killer until probably next year. While the weed-killers you'll use will target broad-leaves, not grasses, it's still not a good idea to spray an infant lawn with them.

You shouldn't have fertilizer issues at all this year. I'd broadcast some 12-12-12 or 10-10-10 after the lawn dies in the fall, just before winter, so it'll have lots of nice nutrients that will leach in with the snowmelt and provide food next spring.

It will be interesting to see how the grass sprouts after you've run that lawn roller over it. I assume it's the metal drum kind you fill with water or is concrete filled. That's a good tool to use after sodding a lawn, but anytime I've planted seed for spot seeding, I've simply raked it in lightly and did not pack anything.

The best lawns I've seen are hydroseeded. I did that for several years. It's a mix of sprayed on water, mulch (like shredded newsprint pellets) and seed. If you keep it wet, you've got lawn sprouting in a week and healthy and thick and ready to mow in a month.

Good that you have the sprinkler system. The key now is keeping that seed moist and not letting the new grass dry out when it comes up.

Good luck!

Link to comment
Share on other sites

I see you're from Fargo so I don't know how fussy they are up there about Phosphourus. Phos is the middle number or a fertilizer mixture. It is for fast growth and root development. Its also what causes so much algae growth in lakes and rivers.

In many bigger cities and especially in farm areas you are required by law to use phos-free fert. The only exception to that rule is for new lawns or plantings. I used to be a die-hard believer in using starter-fert when planting new grass seed, especially in a larger patch.

This year I've done a lot of seed planting for work and I've found that the best sites are in and thick within a month even though I didn't use fert. The number one thing is to water your lawn. Since you have irrigation this shouldn't be a problem. I have to say you'll probably be disappointed with the density of your lawn though if you used a hand speader. I like to use enough seed that I see more seed than dirt. Not a blanket, but more than 50% coverage on the ground. This works really well and leaves few thin spots. If you've got some seed still I would say use it all.

You can use a starter fert now if you'd like, but I wouldn't use other fertilizers until this fall when you would use a winterizer which will provide great root development which happens in the fall. You also get some help in the spring too from this application.

DO NOT USE ANY HERBICIDE through the end of this season. You will kill the grass seed and you will harm it while its growing. I know everybody else made that pretty clear, but it will be temptimg when weeds start to grow in your new lawn. PUll the ones you can and wait to spray until next year.

Depending on the type of grass mix you used, perennial ryegrass usually germinates in 7-10 days so you should have grass by early next week. The bigger blades and denser Kentucky bluegrass usually takes more like 21 days to get going but it is gonna be the one that will stick and become your new lawn. Congrats on your ambitious project!!

Link to comment
Share on other sites

I seeded my yard last Labor day weekend. I then watered it twice a day for a month and a half then used a starter fertilizer.

This spring I seeded the bald spots and firtilized again.

It's looking pretty good now.

With the cooler temps in the spring and fall I think it works out better when seeding.

Link to comment
Share on other sites

I have seeded a few new lawns and have never had any good results unless I put down mulch hay after putting down the seed. It keeps the soil damp longer so you don’t have to water as much, it rots so you don’t have to rake it up when

your lawn comes in and it helps to build a good sod quicker. Mulch hay is pretty cheap and can get your lawn going much sooner. Just spread it over the seed, water and watch the grass grow.

Link to comment
Share on other sites

What I do when I'm overseeding is spread the seed out and they use a still tined rake or maybe just your lawn roller to help turn it into the soil.

The biggest thing with using a lot of seed is also a problem with using too little seed.....either way you feed some to the birds. If you can lightly rake it in or pack it in a bit that helps with soil contact as well as preventing it from getting washed away or eaten.

Link to comment
Share on other sites

I've also relied almost always on mulch when seeding. I've found the shredded pellets of newsprint mulch or the green filaments you can buy at the garden center work the best. They make an excellent covering, absorb and hold water better than straw, decompose faster because the structure is not as rigid, and help keep the birds off, as well. Grass will easily sprout through half an inch of such mulch, as long as it's kept wet and not allowed to dry out and form a crust. Mulch also helps keep soil from eroding on slopes in case of rain in the couple of week it takes before your grass comes up and starts to put down roots to hold the soil. Even gentle slopes can erode in rain if there's no mulch.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.