I have a 14' jon boat that's rated for 25HP. I have a 25HP Merc Prop on there. So it's maxed for the HP.
Now, if I put a jet lower unit on a 25HP powerhead I loose 1/3 of power at the jet so I'll have about 17HP . Can I legally put on a 35-40HP Powerhead then get 25hp at the jet? Is the law talking about the weight or the push?
I'm wondering what everyone thinks. I'll prolly have to call the DNR to find out for sure. But it would be interesting to hear what people think.
I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought.
Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just
buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
Congrats on the motor! I think you’ll like it.
I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers. 160 degrees is more than I expected to hear.
Curious why you’re opting for a 3 bank charger with a 24V trolling motor. Unless you don’t feel you be running you big motor enough to keep that battery up as well?
I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to
get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius)
says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
Question
EBass
I have a 14' jon boat that's rated for 25HP. I have a 25HP Merc Prop on there. So it's maxed for the HP.
Now, if I put a jet lower unit on a 25HP powerhead I loose 1/3 of power at the jet so I'll have about 17HP . Can I legally put on a 35-40HP Powerhead then get 25hp at the jet? Is the law talking about the weight or the push?
I'm wondering what everyone thinks. I'll prolly have to call the DNR to find out for sure. But it would be interesting to hear what people think.
Link to comment
Share on other sites
16 answers to this question
Recommended Posts