Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Brule River (WI)


OnTheWater

Recommended Posts

I really would like to my new jet boat (riverpro lopro) up the brule and fish it. My big concern would be p!ssing ppl off. Is the Brule wide enough so I could keep my distance from the other fisherman? Or should I think twice about it?

Link to comment
Share on other sites

that sure is a nice boat, i would not want to take the risk of all the dents and scratches you would probally receive from people throwing rocks at it. people are very protective of the brule and i am pretty sure motorized crafts are not legal. a boat is not neccessary for the lower river, there are many access spots and in my opinion most of the better fishing is away from the mouth.

Link to comment
Share on other sites

I was out yesterday and the water is going back down and seemed to be clearing up throughout the morning. Still moving a bit fast so I just bounced around to some of the slower holes. I lost three fish before I could see em. There's fresh snags eveywhere some of the holes have changed a bit. At a point I usually cross I almost went down with the Fitzgerald as it seems a small deep hole appeared where it used to be only 3 feet deep. I'll be back out later this week as the flow slows down a bit. I'm not a fan of that fast water and besides there's ducks to kill. Saw 6 canvasbacks hanging around yesterday too. Big ducks.

Link to comment
Share on other sites

i was out two days ago and water is back to looking good (in my opinion) lost one nice fish drifting through some pockets and my partner landed two smaller steelies. we also caught a half dozen jacks. lots of wood in the holes so be ready to re tie a few hooks.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.