Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Vexilar DD-100


Corey Bechtold

Recommended Posts

Probably for safety. A lot of people use Vexilars on their boat (myself included). The display for the DD 100 has a 3 second delay. If you weren't watching the screen and only relying on the DD it could be a safety hazard. I trust my Vexilar over my Lowrance in the river for sure. It's real time! Saved my prop a ton!

Good fishing,

Corey Bechtold

Link to comment
Share on other sites

I picked up one black Friday for $40 at Joes. It installed easily on my FL-8 and I hooked it right into the positive hookup instead of using the piggy back. I used it all day long Saturday without issues. This is an effective addition for both depth read out and battery levels.

Link to comment
Share on other sites

Went out today and one my dd-100`s won`t read the depth anymore. Its on an fl-20 with the tri beam. It wont read in normal mode at all. Put it in low power mode and it reads 67.0 foot .I was in 13 foot. Shut it of and back on a few times and still would not work. Bought these at Scheels a month or so back. Threw away my receipt.

Link to comment
Share on other sites

I had problems using it at home also,,,,contacted Vexilar and this is what was saidDD-100 Not Working It would read 68 ft on low power but worked fine at the deepest depth setting in the air test.

So I emailed Pat at Vexilar here is his reply

Properly testing the DD-100 depends on how your trying to get the

reading to show up. Testing it, through an air test, is 50/50 at best.

You have to do it a certain way with different sonar's to get a depth

reading and it still isn't easy to do. The DD-100 is not designed to

work in air. Get it down to the lake and in the water (deeper than 3

feet) before you determine if it works or not. You need to get a

good/steady bottom reading before the digital depth will show properly.

Pat

Vexilar Service

Vexilar, Inc.

6667 - West Old Shakopee Road

Minneapolis, MN. 55438

Link to comment
Share on other sites

Went out today and one my dd-100`s won`t read the depth anymore. Its on an fl-20 with the tri beam. It wont read in normal mode at all. Put it in low power mode and it reads 67.0 foot .I was in 13 foot. Shut it of and back on a few times and still would not work. Bought these at Scheels a month or so back. Threw away my receipt.

I had switched the head units between the 20 & 22. The 22 has the tri beam transducer and the 20 has the pro view transducer. I switched the head units back and it works great now. Wierd

Link to comment
Share on other sites

Pat at Vex told me the following:

"normally the DD-100 will not show you a depth reading or at least

a correct depth reading if the unit is run in the LP mode. Not enough

signal strength to make the DD-100 operate correctly."

Well, for me, I don't get it. Spend 50.00 on something that only runs right in normal mode when I often fish in LP mode just doesn't seem right!

Link to comment
Share on other sites

Pat at Vex told me the following:

"normally the DD-100 will not show you a depth reading or at least

a correct depth reading if the unit is run in the LP mode. Not enough

signal strength to make the DD-100 operate correctly."

Well, for me, I don't get it. Spend 50.00 on something that only runs right in normal mode when I often fish in LP mode just doesn't seem right!

If you only use your Vex for ice fishing, then you don't need to know the depth on a continuing basis and a quick depth check at turn on is all that is needed before turning on the LP mode. And I'm not sure what percentage of Vex users are using their Vex on a boat, but I would assume very, very few. I certainly wouldn't and I haven't seen a flasher type depth finder on a boat in at least 30 years. So for me - and me alone - I don't see this a BIG problem. I'm very happy with the addition of the DD-100 to my FL 20.
Link to comment
Share on other sites

Pro view all the way!!!

As far as the depth reading in LP mode it's not that big of a deal for me. If I'm hole hopping looking for weeds or fish I run in the normal mode. Once I find a spot and know the depth and switch to LP I know what the depth is anyway. It's pretty easy in my opinion. A 50 dollar add on, worth every penny!

Good fishing,

Corey Bechtold

Link to comment
Share on other sites

If you only use your Vex for ice fishing, then you don't need to know the depth on a continuing basis and a quick depth check at turn on is all that is needed before turning on the LP mode. And I'm not sure what percentage of Vex users are using their Vex on a boat, but I would assume very, very few. I certainly wouldn't and I haven't seen a flasher type depth finder on a boat in at least 30 years. So for me - and me alone - I don't see this a BIG problem. I'm very happy with the addition of the DD-100 to my FL 20.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.