Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Resharpening Auger Blades


trollingforeyes

Question

7 answers to this question

Recommended Posts

  • 0

I'm not trying to hijack your post, but has anyone tried to sharpen the blades using a grinder. If so, how did it work out for you. I've thought about giving it a try with some extra blades I have.

I've done it with a Work Sharp knife sharpener. I think the abrasive belt is a little more forgiving than a grinder is. They weren't as sharp as I remembered new blades being but they worked pretty well. Holding the blades with a needle nose Vicegrip in a way that I could use the guide for the angle was the toughest part.

Link to comment
Share on other sites

  • 0

Check around with bait and tackle shops. Find one that sells resharpened blades. The only I use has re-sharps for sale and offers a trade-in price for your dull ones. Last time I traded in it was $20 for a set of sharpened blades if you dropped off your dull ones. Pretty good deal IMO and you can always have a spare set in your bag .

Link to comment
Share on other sites

  • 0

smile Thanks for all the replies. I mailed my blades to Red Rock in Ely Monday morning. I was very surprised when I received them back today, Thursday morning. That is very fast service. I put them on the auger and headed down to the lake for the real test. WOLA!! I had 3 holes thru the ice just as fast as it was new. Kudos to Red Rock for a outstanding job. I will be sending another set soon. It is very nice to know of a local merchant that provides outstanding service such as RED ROCK OUTFITTERS IN ELY MN

><[[[[[[[[[[[[[[[*> ><[[[[[*> ¸¸.•´¯`•.¸¸.•´¯`•.¸¸.•´¯`•.¸¸.•´¯`•.¸><((((°>

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.