Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Tamarack Swamps


Recommended Posts

I have seen deer out in tamarack swamps that bed down on islands of high ground. I also am a firm believe that in areas where there is alot of hunting pressure deer will always go to the thickest cover they can find. Usually they take the path of least resistance, but they will go to amazing lengths to get to a safety zone.

They will be in there especially after the ground freezes and its easier to get in and out.

Link to comment
Share on other sites

They love them, thick cover, lots of little high spots next to the bigger trees for bedding. Not a lot of human pressure, I spend a lot of time in them every fall. Have seen some big bucks and have been lucky enough to take a few of them.

Link to comment
Share on other sites

I hunt in a Tamarack swamp. I built a wooden stand on a dry island that is accessible every year. I see deer way more than the others in our party who hunt on the edges of the swamp and/or sit on field edges. For a wet environment there is actually a lot of dry areas if you think like a deer! In our situation we seek out willow patches within the bog and the deer love bedding in there.

One trick that I have learned is that on windy days the deer love to lay behind a blow down (which there are a lot of due to the ecology of a tamarack bog) out of the wind and bask in the sun. On a windy day you can use that to your advantage.

One draw back is that in my experience they go EVERYWHERE in the bog. I have my base stand and have hang-ons that I use based on wind and such. It seems to me that they use trails a lot less once you leave the perimeter of the swamp. Focus on natural funnels or choke points especially spits of dry land (we simply call these islands). Having said that, as mentioned previously, once the needles come off the trees your visibility increases dramatically.

I would definitely hunt the swamp especially later in the season as conditions get worse.

If you have specific questions feel free to PM me!

Link to comment
Share on other sites

I also hunt a tamarack swamp. We only have a couple logging trails to access, and even those are wet with some sink holes that will ruin your hunt. That makes it difficult to get anywhere without making enough noise to alert ever deer for miles around.

I second the below quote. It seems like the can, and do, move just about anywhere in there. Lots of cover for them to grow old in.

It seems to me that they use trails a lot less once you leave the perimeter of the swamp. Focus on natural funnels or choke points especially spits of dry land (we simply call these islands). Having said that, as mentioned previously, once the needles come off the trees your visibility increases dramatically.

I would definitely hunt the swamp especially later in the season as conditions get worse.

If you have specific questions feel free to PM me!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.