Winchester SX2 gas piston

[Fowlmouth]

Does anyone know how to take this apart and clean it? Thanks

[Ufatz]

Here's a thought: try the Winchester and I'll bet a zillion dollars you can find exactly what you need.

[tracker x-2]

I have never taken mine apart i usually try to use gun scrubber and spray it down and then use the air compressor to blow it out. Maybe Google "Winchester repair manual" for instructions on how to disassemble it.

Also a you tube search can be very useful!

[SmilinBob]

It's one of those things that's not meant to be taken apart, trust me, I do this for a living, just spray it out.

[Gordie]

It's one of those things that's not meant to be taken apart, trust me, I do this for a living, just spray it out.

Ditto!

Drop in a jar of Hoppes #9 and let it sit awhile then use a stiff nylon brush to clean it off then spray down with some gun scrubber and reinstall on Gun.

[Fowlmouth]

Thanks for the input guys. I think i'll just do that Gordie, soak it in hoppes and give it a good scrubbing.

[carpshooterdeluxe]

soak it and scrub it best you can. I took mine apart ONCE and I will never do it again. The spring requires a ton of compression to get it put back together.