FishHawk11 Posted May 18, 2014 Share Posted May 18, 2014 How do I adjust my motor so that when I am running at full throttle the steering will doesn't want to turn all the way to if I were to let go. It seems quite a bit looser than my previous boat. I know that Torque will always pull on the steering wheel but this seems more than I am used to. Quote Link to comment Share on other sites More sharing options...
nitro640 Posted May 19, 2014 Share Posted May 19, 2014 Trim it up. Quote Link to comment Share on other sites More sharing options...
delcecchi Posted May 19, 2014 Share Posted May 19, 2014 If trim doesn't do trick, rotate tab on bottom of anti-ventilation plate. Quote Link to comment Share on other sites More sharing options...
aanderud Posted May 19, 2014 Share Posted May 19, 2014 There should be a little torque compensation trim tab on the outboard, above and behind the propeller. Adjust it left or right (there will be a bolt or a bolt/nut combo). Something like this: Quote Link to comment Share on other sites More sharing options...
fishingstar Posted May 19, 2014 Share Posted May 19, 2014 my boat did the same thing. It will pull one way if it is trimmed down to far trim it up to far it will pull the other way. I put a steering damper and that made it a lot better.Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.