hunterdave29 Posted December 15, 2013 Share Posted December 15, 2013 My heater acts like its stuck on "super low"! If I turn the knob to different settings it doesn't make any difference. No lines are pinched. Please help! Quote Link to comment Share on other sites More sharing options...
dairyman Posted December 15, 2013 Share Posted December 15, 2013 sounds like the knob is spinning on the shaft of the selector Quote Link to comment Share on other sites More sharing options...
highlife4me Posted December 15, 2013 Share Posted December 15, 2013 Heater probably needs a good cleaning or has a defective thermocouple. Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted December 15, 2013 Share Posted December 15, 2013 Are you running off a remote tank?What hose do you have, regulate or non regulated?Is this new or have you had it for a while?If you're using a remote tank have you tried turning the tank off, burning off the residual pressure in the line, and then SLOWLY, turn the tank valve back on? Quote Link to comment Share on other sites More sharing options...
leech~~ Posted December 15, 2013 Share Posted December 15, 2013 Clogged or iced up! You may need to add a filter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.