Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lakemaster software?


Moose

Recommended Posts

I currently use the Garmin version of Lakemaster Minnesota Version 7 software. It uses Mapsource as the software to view the maps.Can I use anything else for this? I would like it to show some Topo or a satalite view. I use it on my computer and upload anything I need to my Nuvi when I go out. I realize I will still need to use mapsource to upload to the Nuvi. I have it linked to Google Earth but that just shows me the lake and doesn't incorporate the depth chart.

Thank you

Link to comment
Share on other sites

I searched this and found that mapsource has been replaced by basecamp, and another post said you needed to have at least one waypoint on the garmin map to get it to show up.

Would the lake maps work with Basecamp?

Link to comment
Share on other sites

Del

Could you post the link? I did a search and wasn't able to find it. I looked at basecamp and that would be 100 times better than mapsource. I'm just not sure if I can merge the 2 gona have to do some looking.By the way sorry for not searching it first I was just kinda venting about garmin and mapsource. Another nice thing about basecamp is that I can use my nuvi as an antenna and use the laptop in the truck.

Thank you!

Link to comment
Share on other sites

OK, hope this is rules compliant

http://www.gpsvisualizer.com/kml_overlay

http://youtu.be/-69m5Jx6WSY

http://productforums.google.com/forum/#!topic/earth/RZ8mmzvmoC0

http://www.bestbikingroads.com/ms1.pdf (like on page 27)

http://www8.garmin.com/outdoor/custommaps_instruct.pdf#search=%22google+earth%22

http://garmin.blogs.com/my_weblog/2006/07/chets_corner_go.html?cid=20455058

Hope these help....

Oh and one more...

http://youtu.be/797dbfr6xGM

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.