bhs91 Posted August 7, 2012 Share Posted August 7, 2012 My auto shocks on my suburban were going bad and rather than replace those, i just had a mechanic pull them and put heavy duty shocks in it. He also disabled the pump that would inflate the shocks and now in my message center it says,"service air ride system". Any chance i can rid of that warning or am i stuck with it? If so, no biggie that is what tape is for:) Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted August 7, 2012 Share Posted August 7, 2012 Your stuck with it! Quote Link to comment Share on other sites More sharing options...
Macgyver55 Posted August 7, 2012 Share Posted August 7, 2012 There are supposed to be plug-in resistors sold for this very issue but I'm not sure where to get them. There is another way, (I've never done it) and I dont know how much time , effort or expense you want to deal with but I've heard that you can also fool the computer by installing 1/2 Watt carbon types resistors that are available in a 5-pack at Radio Shack for a few bucks. Supposedly you simply jumper the connector with a resistor. 4.5 KOhm, I believe. Insulate and waterproof well. Dont hold me to it as I said, I've not done this, but was told it should work. Your results may vary! If you do decide to try it, let us know if it works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.