mnguy152 Posted May 26, 2012 Share Posted May 26, 2012 My boat key got bent I have a 90 lund angler ss. The boat is a concel went to the local hardware store and got the run around any tips who would have a blank key to get a new one cut. Quote Link to comment Share on other sites More sharing options...
Tom7227 Posted May 26, 2012 Share Posted May 26, 2012 Where are you located? Hard to answer your question without that info. Quote Link to comment Share on other sites More sharing options...
delcecchi Posted May 26, 2012 Share Posted May 26, 2012 The control is supplied by the motor manufacturer. There are a few differnt keys they use. My mercury key was 1B as I recall. So you need to work with a dealer for the brand of motor you have. Quote Link to comment Share on other sites More sharing options...
Gordie Posted May 26, 2012 Share Posted May 26, 2012 Yep a dealer can replace it they can look up the serial number on the control or switch and then they can tell what it is . My merc was a 4F If I remember correctly. Quote Link to comment Share on other sites More sharing options...
Down Deep Posted May 28, 2012 Share Posted May 28, 2012 A locksmith shop will have a bigger variety key blanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.