Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Tips of working two baits


Scoot

Recommended Posts

Title for this thread should be "Tips on working two baits". Tried to edit it, but it won't let me edit my title. I am literate (mostly). grin.gif

Looking for tips on working two baits-
1) a 10" suick. As I understand working this guy, simply reel in at a steady retrieve while giving it a good hard and long jerk every couple of seconds. Sound right?

2) Hog wobbler- medium speed stady retrieve keeping the lure just on the top of the water. How's that sound?

I realize the general rules of "speed it up" and "slow it down" and "mix it up a little bit" apply here, but generally speaking, am I on the right track above?
Scoot

[This message has been edited by Scoot (edited 06-10-2003).]

Link to comment
Share on other sites

Right on as far as mixing them or it up.
Hoggwobbler can do many things.
But used as a Topwater slow is grand.

Suicks ALL seem to work different.
I like the 10" inch to toss in open Weed pockets and let it sit a bit.
Get it to dance some and twitch, then swim it out, then rest in another weed pocket.
Good in shallow rock also.
Bend tails some to get them to dance an quiver as you reel.
Don't take much to trigger a strike, and it is hard to just let them sit.
But it can payoff BIG time.
smile.gif
You can also jerk and crank them, but that depends on time of season, where your fish, where fish are hanging and what the fish tell you they want.
Good baits, have fun with them.

T.

Mallard Island
Lake Vermilion

www.muskytomsguideservice.com

[This message has been edited by TomWehler (edited 06-10-2003).]

Link to comment
Share on other sites

The "grand suick", definitely my go to bait when things get sloppy. Jusy give the bait tail a few adjustments to make the bait work for you,everybody has a little different way of working the rod. I had trouble when I first starting using them years ago, when I had to do every thing fast. smile.gifTry "sweeping" it at first in clear water so you can see it work slow once you get the feel for that you can easily start speeding it up and changing it up. The tail is critical to the suicks action,tiny adjustment make a world of change,up/down-side/side. The operation of a suick is a art,that must come to you in a vision after hours of practice. grin.gif Hang in there the suick will pay you back for your time many times over.

Link to comment
Share on other sites

It's not that simple. Different days and different fish bring different triggers. I like to set mine to dive sharply on the tug (bend tail metal down) right off the bat.

But that only lasts until I've made a bunch of casts over prime pike water without a fish or with a follow but no take (same in musky water, the half dozen times I've fished for Esox Sr.)

You can twist the tail a bit and the bait goes to the side. Sometimes that does it. You can leave the tail straight and the bait won't dive as hard, and that works some days.

I also start my day with steady cranking on the handle and short sharp frequent jerks, chaning when I think I need to. Some days fish will hit if you leave it on the surface and twitch it.

Just no tellin' until you're out there. If nothing else, it's a great arm/shoulder workout. You'll never see a veteran jerkbaiter with skimpy shoulders and arms. grin.gif

------------------
"Worry less, fish more."
Steve Foss
[email protected]

Link to comment
Share on other sites

My clad has used both of those baits in Canada. My nephew has a black suick that is just beat to heck. The trebles have scratched the paint in patterns that seem to make it work better. His basic pattern is cast and jerk that sucker in. No fancy dance or float-stop-jeck-twitch etc,etc Once he get it about 3/4 the way in, he just reels and recasts back in the weeds. I'm sure the pureist out there will say it's wrong, but a 55 inch muskie, and 3 muskies in 3 casts last year. Hey can't beat that. I got a black suick last year and started rubbing the hooks on the body to get it scratch -up.
As for the wobbler. About the same. Just reel that sucker in. My clad really doesn't use them. We got them but never seem to make it out of the box. I suppose this might beto simple, but it's defininately works for us.Stm

------------------
And good luck out there!

[This message has been edited by Paul Waldowski (edited 06-16-2003).]

Link to comment
Share on other sites

Hey Guys,
The Creeper is one if not the Best flat
water baits ever made. The problem is that most people work them way to fast.

The "Creeping Tom" from Slam'er, is the best in my opinion. They were designed to work the best in calm flat water and they excell in low light conditions.

The key to success with a creeper is an easy one, work them S_L_O_W. You want to get the bait to make that plop, plop
sound as you retreive it. smile.gif

I like them over rocks but they also do well in the weeds and out on the deep weed edge. All of mine are black but I hear they get them on some other colors as well. smile.gif

------------------

Terry "Ace" Sjoberg
Ace guide service.
aceguideservice.com
218-753-2612
[email protected]

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.