Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

2004 S10 Blazer Code P0101


Recommended Posts

Was wondering if anyone had any information on how to fix this?

Check engine light only comes on when accelerating to get to highway speed. This is the info I get from the code reader and Innova's HSOforum:

P0101 MAF Sensor Signal Range/Performance

Parameter Description Results

DTC for which Freeze Frame was Stored P0101

Fuel System 1 Status Closed Loop

Fuel System 2 Status Closed Loop

Calculated LOAD Value 25.88 %

Engine Coolant Temp 188.60 °F

Short Term Fuel Trim - Bank 1 12.50 %

Long Term Fuel Trim - Bank 1 12.50 %

Short Term Fuel Trim - Bank 2 17.19 %

Long Term Fuel Trim - Bank 2 9.38 %

Intake Manifold Absolute Pressure 25.46 inHg

Engine RPM 1,921.50 rpm

Vehicle Speed Sensor 64.62 mph

Air Flow Rate Mass Air Flow Sensor 5.61 lb/min

Absolute Throttle Position 39.22 %

Link to comment
Share on other sites

You can buy some MAF "Mass Air Flow" cleaner I would give that a try. It's right before the throttle body and has little wires going acrossed it that senses the amount of air flow going through it. Some times they get dirty over time and need to be cleaned. wink

Link to comment
Share on other sites

She may have gotten off easy (and I may have gotten out of work) turns out her air cleaner hadn't been changed in a while and was extremely dirty. The place where she normally has her oil changed either hadn't been checking it, or didn't tell her it needed to be changed.

Link to comment
Share on other sites

The place where she normally has her oil changed either hadn't been checking it, or didn't tell her it needed to be changed.

Or they had been telling her and she told them she would have her Husband change it and the message never maid it to you. I see that one play out several times a year.

Link to comment
Share on other sites

Or they had been telling her and she told them she would have her Husband change it and the message never maid it to you. I see that one play out several times a year.

Lol, I always tell my wife to just have the guy note work that they think she should have done like Wippers, Air Cleaner, Injecter cleaner, Trany serv, etc, etc on the bill and I will take care of it! wink

Link to comment
Share on other sites

Or they had been telling her and she told them she would have her Husband change it and the message never maid it to you. I see that one play out several times a year.

I can definitely see that happening but the GF is really good about letting the folks do what needs to be done. The normal place she takes her vehicle to is not a regular repair shop though, it's the service guys at her work, hence the reason they probably never checked it and asked her if she wanted it replaced.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.