Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

carpet or no carpet?


tonykummrow

Recommended Posts

Been debating the last few weeks on putting carpet in the fish house. Some say the floor wont be able to dry well and others say it will be fine. After we drill our holes the floor gets full of ice chips and snow, and for the first 8 hours out the floor stays fairly wet. if this is gonna keep the floor from drying then we are not gonna use it. Any thoughts? Thanks

Link to comment
Share on other sites

From my experience if your actively fishing, and catching fish...your carpet is going to stay wet. Depends though if you have a fan blowing to circulate air onto the floor. Got to remember, most ice houses all the heat is concentrated in the upper half of house, and with no air movement the carpet won't magically dry.

With a fan, i don't see why you couldn't get it dry a few hours after drilling holes...Also each time you track in snow, thats just more water in the carpet.

IMO, i wouldn't put carpet in your house.

Link to comment
Share on other sites

Try using carpet tile.

We remove the tile before we drill the holes and then put it back after we have the holes drilled and cleaned out.

If the floor does get wet we use a broom to get all the water/ice off before we put them back.

Works good and no more wet feet.

Sifty

Link to comment
Share on other sites

I love having carpet in the house. I sealed the plywood underneath, layed down some indoor/outdoor carpet and the floor is never wet. Keep a broom in the house and after you drill your holes, sweep out all the ice shavings and shovel the snow away outside the door.

Link to comment
Share on other sites

We have carpet in ours and like it, just like stated before, drill your holes and sweep up the snow and ice chips. Also I keep a pair of slippers in the house and wear them we are all set up even to go outside for a second. No big lugs to track snow in.

Link to comment
Share on other sites

Looks like it a kind of 50/50 shot, either you like it or you dont. instead of doing a fastened down carpet. maybe a carpet the fits that we can drag out before we drill holes would be nice. we could sweep up the floor, and remove all snow, then reinstall carpet before sitting down to enjoy a day and night of fishing. we never go out for just a few hours. its always at least 16 hours before we head home. what do you all think about that idea?

Link to comment
Share on other sites

We have non-slip vinyl flooring with several rugs. Can clean rugs after each trip if need be. Can move rugs during trip to allow air flow to dry floor. Can't imagine keeping carpet dry unless attempting to set record for staring at a flasher screen.

Link to comment
Share on other sites

i used rugs for a couple years. have an insulated floor and have just the thin underlayment on top of the foam insulation. i carpeted and even used carpet foam underneath. i used a thin carpet and do sweep it after drilling holes. use rugs by door and have a regular ceiling fan. love the carpet. boots stay by the door and wear slippers most of the time. i dont think youll regret carpet.

Link to comment
Share on other sites

I would opt for the Marine Vinyl boat flooring with the aggressive rubberized finish. Slip resistant and easy to clean and will not get soaked up. Add a runner type rug to fit your needs latter if you think you need it. They runner rugs roll up and get out of the way easily, and dry fairly quickly.

Link to comment
Share on other sites

I personally would go carpet. I have had both, one with a vinyl floor (extra from a bathroom) and another with a boat carpet. The boat carpet was the way to go and since it was a marine carpet it dried very well, even in the cold (no fans in the house). If you do carpet I would definitely go with a marine grade.

Although I might be partial because the vinyl wasn't very good, just got too slippery with the snow and ice on it smile

Link to comment
Share on other sites

Oil base enamel paint with a lite sand sprinkle, no slip easy to clean.

Put a few carpet mats around if you need to. They sell "paint sand" at

hardware store. Seen a couple boats with colored pickup liner in them

guys said it works great.

2c

Link to comment
Share on other sites

mr clean are you sure its the carpet that smells? jk

i am thinking of pulling the original carpet up in my house & putting in the pontoon carpet they sell at FF. but i do need to add either a good fan or go to forced air. i like the runner idea.

Link to comment
Share on other sites

I am still debating on what type of flooring to use. i have a 5x4 rubber backed carpet under my table inbetween the booth. I also have 12volt fans on the celing of my hut to push the heat back down to the floor. For preventitive maintence I installed an open mesh aluminium ramp infront of my door.

Here is a picture of the ramp.

a>

It also helps for security, when folded up.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
    • I went ahead and watched some of the MLF coverage.  Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.   Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
    • Yeah we fished like 6 or 7 lakes down here. 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.