Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Tonneau Cover recommendations?


Recommended Posts

Just purchased a new (to me) Ford F-150 Crew Cab with the 5.5ft bed.

I have had both the roll top and the velcro side attached and not sure I am seriously sold on either, both had pro's & con's to them.

Any recommendations for either?

The roll top I liked a tad more, but it did take up another 8-10" towards the front of the box where it rolled into.

The other I could never seem to get totally sealed to keep all the water out and the velcro would not reseal great during the winter after rolling it back out..

Just seeing what you all like/dislike.

Link to comment
Share on other sites

I bought a new Chevy last fall. Hadn't had a pick-up for a long time. As part of the purchase I had them install a Access brand tonneau cover. I wasn't sure if I would like it or not and I am still not sure. I had owned two Tahoes in the past and I liked the security of putting my "stuff" in the back and having it dry. The tonneau isn't totally dry but I only seen to get a couple of small trickles in the box from the rain or car wash. Not a big thing to me because I use plastic cargo boxes to keep things dry. The other thing that is a little frustrating is having to unroll the top to get at things stored in the boxes which sit right behind the cab. I have thought of using a hook to pull them to the rear of the truck but haven't done anything about it yet. I think the quality of the Access brand is probably the best that I have seen as I have looked at other covers installed on other trucks and I like the Access best. I didn't like the roll top type because of the space it takes up as I also have a short box. The only other option is a har shell topper or cover and I didn't want the hassle of having to remove it if the wife wanted something big hauled.

I guess I changed my mind and I am pretty satisfied with the cover after all. LOL

Good Luck!!

Mike

Link to comment
Share on other sites

We need to get something for my new truck. I am looking at the tonneaus or a leer topper. I really want to get a nice topper. But then when I want to haul the wheeler or something else big I would have to take it off. I am looking at eh access, the bak flip and the leer 100 xl or xr.

Link to comment
Share on other sites

The other thing that is a little frustrating is having to unroll the top to get at things stored in the boxes which sit right behind the cab. I have thought of using a hook to pull them to the rear of the truck but haven't done anything about it yet.

Well thats really just a pickup thing. Anything that slides to the front of my pickup box I can't reach from anywhere without some help. A cargo bar of some sort placed behind or near the wheelwells will keep your items from sliding all the way forward.

Link to comment
Share on other sites

About 6 months in, I'm still very happy with the BakFlip. No water intrusion at all, and it would take at least a crow bar to break in. I have the G2, and would recommend going with the F1. I have about a thousand barely noticeable dents from pea sized hail. I've heard they will replace it, but its not that big of a problem. The fiberglass wouldn't have dented at all.

Link to comment
Share on other sites

I purchased the Truxedo LoPro last fall. I like the looks and it is very water resistant for a soft cover. My only issue is that when I'm driving very fast (75 mph +) it makes noise. I recently drove to central North Dakota and I was driving very fast on the way to my destination. It annoyed me so much that I took the cover off for the drive home. When going 65 mph it is fine, but high speeds and it drives me nuts. Wish there was a fix, although the majority of my driving is 60 mph or less, and it is silent at those speeds.

Link to comment
Share on other sites

THe Access Brand tonneau's are the best soft cover $$$ can buy . They might not be totally water tight but neither is the box of your truck/tailgate that is also one of the reasons the beds in trucks are ribbed so if you get a little water in it goes into the valleys of the bed it also adds strength to the thin metals they use. I would recommend the Original Access Cover over any other tonneau out there not with the lifetime warranty on the Velcro its a cover that will provide you with many years of use if properly maintained (ie. keeping proper tension and sealing Velcro each timed rolled out)

Link to comment
Share on other sites

I wouldn't use armor all on it but use something with out silicon Wizards have a Tire/Vinyl shine that works best won't attract any dust. What I find the most is that ford doesn't seal up there bedcaps and water runs in the front and trickle down the sides somewhere just a few drops not the end of the world

Link to comment
Share on other sites

Armor All is made specifically for vinyl/plastic and has UV protectants that will keep the vinyl from fading/drying out, plus contains "plasticisers" to keep the vinyl soft. Tire spray does not. Silicone will only enhance water run-off, and keep bird droppings from staining and "setting". Mine looks like the day I bought it...my neighbors is getting a little dull, he uses some generic spray foam for vinyl. Just use a good vinyl protectant with added UV properties and you should be good to go.

Link to comment
Share on other sites

Take a look at Wizards its not your average tire spray and you can spray it on and drive down a gravel road and it wont attract dust like armour all will. Agri cover doesn't even recommend any type of spray but just to make people happy they offer formula 2 cleaner another non silicone product.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.