Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Broadheads for Turkey hunting


Musky hunter 82

Recommended Posts

I'm planning on hunting Turkeys for the first time this year and am wondering what broadheads to use (I know it's going to be harder to kill one with a bow, but it's way more rewarding to me). Right now I use a mechanical for deer hunting in 100 grain. Would this get the job done? I've heard that you don't want the arrow to pass through, and that you should aim for a spot in between the thigh and the wing. Is that the best place to shot them? Thank you for the advice, and good luck to everyone in the drawing.

Link to comment
Share on other sites

shot my turkey last year with thunderhead 100s, shot it looking right at my just above the beard passed right through bird went about 5 yards maybe, my buddy shot 2 with a 2 blade rage they did a pretty good job on those.

Link to comment
Share on other sites

I used a 3 blade rage since I wanted to get rid of them. I shot mine at 5 yards and dropped the bird but he got up a little bit later and hobbled off which I had to chase him. I think almost any broad head will work. I've seen the Guillotine broad head but that don't work with how I have things set up and I don't know if I'm that good of a shot to shoot just the head off.

Link to comment
Share on other sites

Any head used for deer that you feel comfortable with will take a turkey. That being said, I always recommend a large diameter mechanical. The vital area on a turkey is about the size of a softball, a larger head has a better chance of getting into the heart-lung area.

As far as WHERE to shoot them, there are three tranes of thought. Code-man mentioned the guillotine for head shots. There are actually a few different heads made for the head shot, however I believe none will fly with your current set-up. You need different arrows, etc., besides, I never seem to see a turkey that will stand still long enough for this type of shot.

That leaved the two that most use. One is to aim just up from the leg in the hip area. The thought here is to stop him from running and to cut the large vein going to the leg resulting in quick blood loss.

For me and most others, the heart-lung area is right at the butt of the wing. Any shot from here up towards the neck should put a bird down very quickly.

An arrow that hits the center of the bird likely results in a gut shot and much chasing may result.

It's a very exciting hunt any way you choose to do it. Good luck!

Link to comment
Share on other sites

As DonBo stated any head used for deer will work on turkey's

I use hammerheads by rocket. I change the tip out with a larger chisel tip. I like how this bust up the bird. I also have taken a handful with sidewinder by rocket they do just as much damage.

This last fall I took a hen walking out from my tree stand after shooting a buck using the meat seeker. That really did a good job better then I thought. I will have those three in my quiver when I enter the spring woods this year.

I hunt archery only season in NE for the last 7 years and it's a blast. One thing for sure I do like coming back and taking the old pipe bomb out of the gun safe and getting even. smile

I really perfer the broadside shot over a front shot. I will have the wing butt or hips to aim at. I have taken a few through the wing butt they can still run. My best shot is taking out the hips no legs they can't run or fly.Good luck and you will be hooked after on season.

Link to comment
Share on other sites

I use the rage 2 blade because i bought them for deer and didnt like them so i wanted to get rid of them they work good for turkeys since they dont penetrate very well, i always try to wait till the bird comes out of strut a little bit its very east to shoot threw all of the extra feathers when there in full strut, ive always heard the saing "hit em high watch em die, hit em low watch em go"

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.