Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Tinting the windows in my ice castle?


stealth3350

Recommended Posts

looking for opinions on tinting windows in 2011 ice castle fish house.. tint keeps car cooler in somertime so why wouldnt it keep it warmer in the winter right? i thought if i used a nice 50% tint it would keep that bright light out in the day and help keep heat in.. plus it would look real nice from the outside and harder to see in. as a matter of fact u could tint as dark as u wanted being there is no tint laws for trailer or ice houses? i saw a fish house on hsolist that had real dark tint and it looked real nice from the outside..

Link to comment
Share on other sites

Do you have a warm place to keep it for a few days after its tinted? Tinting windows in the cold is tough because you have to use soapy water to activate the glue on tint and you don't want that to freeze.

Mirror tint would look nice on a house and is tough to see in as well

Link to comment
Share on other sites

yes i have a place it will stay warm to do tinting.. allso when looking out the window it would stop the blinding glare from the snow so u could see your tip ups better.. not to mention light in the house hitting the tv.. i found this article saying it does keep heat in.. Keep cool in summer, keep warm in winter.

By reflecting heat from the sun away in summer, and heat from your building back into the room in winter, window film works to reduce your cooling and heating energy costs, reduces CO2 emissions and reduces your carbon footprint.Another important benefit of house window tinting is that it helps to conserve energy. In the summertime reducing the amount of sunlight entering the home will drastically reduce cooling costs. In the winter time the tinting acts as a insulator to keep warm air to escape from the windows. Insulating films also retain up to 55 percent of your home’s heat in winter.

UV Protection - Protect Your Furniture and other office products against fasing caused by damaging UV rays. UV Films (clear and tinted) keeps window displays fresh and vibrant without any loss of visibility for customers.

Reduce the Level of Annoying Glare - Whether from direct sunlight or reflection, glare can be bothersome and is harmful and tiring to the eyes. Office Window film can correct any glare problem, making daily tasks easier for your occupants.

Link to comment
Share on other sites

From your article, it seems like the heat loss benefit is due to just having another layer of film on the window, not the actual color.

IMO, if you think it looks cool and would be easier to see tip ups, do it up, but I dont think heat loss should be your deciding factor. The windows in shacks are so small anyways, I dont think it will make too much of a difference.

Link to comment
Share on other sites

Lightning hit the nail on the head.... you are actually blocking out heat/energy from entering your wheelhouse by tinting your windows... Windows in wheelhouses are so small, I don't think you are losing a ton of "energy" or heat out of your windows anyways... If you tint the window, your going to decrease the amount of sunlight and heat/energy that is able to come thru the window, so your actually going to be doing the opposite of what you what....

i don't get how tinting acts as a insulator on a window and keeps warm arm from escaping to the outside. its not like it is the 3M insulation stuff, and if tinting windows worked better than the 3M stuff, I think you would see a ton of people tinting their windows at home... I think window thickness and sealant has much more effect on keeping warm air in than the tint itself actually does.

79.34990% of all statistics are made up

now if your main goal was better insulation around your windows, i would use the 3M stuff that many people use on their windows at home. not sure what its called but i can guarantee you that will retain more heat for you than a simple tint job will do, and will probably cost the same or less

Link to comment
Share on other sites

yes i have a place it will stay warm to do tinting.. allso when looking out the window it would stop the blinding glare from the snow so u could see your tip ups better.. not to mention light in the house hitting the tv.. i found this article saying it does keep heat in.. Keep cool in summer, keep warm in winter.

By reflecting heat from the sun away in summer, and heat from your building back into the room in winter, window film works to reduce your cooling and heating energy costs, reduces CO2 emissions and reduces your carbon footprint.Another important benefit of house window tinting is that it helps to conserve energy. In the summertime reducing the amount of sunlight entering the home will drastically reduce cooling costs. In the winter time the tinting acts as a insulator to keep warm air to escape from the windows. Insulating films also retain up to 55 percent of your home’s heat in winter.

UV Protection - Protect Your Furniture and other office products against fasing caused by damaging UV rays. UV Films (clear and tinted) keeps window displays fresh and vibrant without any loss of visibility for customers.

Reduce the Level of Annoying Glare - Whether from direct sunlight or reflection, glare can be bothersome and is harmful and tiring to the eyes. Office Window film can correct any glare problem, making daily tasks easier for your occupants.

If you think tinting windows would help with keeping heat in, research a company called "Sage Glass." They are doing some pretty revolutionary things with tinting home windows.

Link to comment
Share on other sites

yes the tint i would be using is not wallmart garbage.. its actually 3m crystaline made for houses not automotive.. supposingly its sapost insulate the same no matter what darkness is used.. the color is just for privacy or looks the actual contents of the 3m film insulate.. so yeah i dont know. i usually have the curtians closed in the day anyway.. but having a darker color on the window would atract more sunlight .. who knows it was just a thought i may give it a whirl.. not going to cost anything as buddy does window tinting on houses.. so this film is desighned to be energy efficient for houses..

Link to comment
Share on other sites

stealth- that is very cool info! i didnt know 3M made tint for houses. that sounds pretty neat and i guess your right, i didn't think about the windows being darker and thus attracting more sunlight. I really dont think it is going to make a noticeable difference, however I do like the idea of people not being able to see inside from the outside (such as thieves). they wouldn't be able to tell if someone was sleeping inside or if no one was home.... i really like the idea for security purposes...

Link to comment
Share on other sites

You may be better off going to canvas craft and having them make a window cover from their thinsulate canvas used on their flip over shacks. It can be snapped or velcro'd over each window. It will serve a dual purpose, to keep the heat in at night as well as keep the cold out. It also reduces frost build up because it keeps a lot of the moisture away from the glass. You could leave that up during the day on the side of the house the sun shines on and pull down the back side window for regular light.

Tinting is nice for looks, but this would be functional also.

I think the new Lodges are coming with this as an option.

Link to comment
Share on other sites

Hi, Devil's Advocate here, if I'm a Conservation Officer and I see window tinting on an ice shack, I may be compelled to find out what in the world that person might be trying to hide? I believe that curtains would serve the purpose of keeping heat in at night, and the glare of the sun out during the day also. They also keep prying eyes out that you don't want looking in at night if you're not there. but if tinting trips your trigger, go for it. Just my 2c

Link to comment
Share on other sites

If you want to try the tinting with out it being permanent you can get the "cling on type" at the wally world store. I've used on windows in my house in the summer and then in the winter it just peels right off. This way if you don't like how it works or looks there no mess removing it. It was fairly easy to get all the bubbles out, just takes a little patience.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.