Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Prepping skis and snowboards for summer


Recommended Posts

Now that the ski and snowboard season is over, you should consider prepping your skis and snowboards for summer storage. Why you ask? Because adding a coat of wax now will help protect the ski bases and prevent them from drying out during the summer months. So how do you do it? It's actually quite simple and quick. First you clean the ski bases like normal and let them dry. Next you add a coat of soft wax to the bases. I usually drip wax onto the bases with the iron, then spread the wax over the base to make sure the wax covers the entire base. Apply wax generously. You may need to add a second coat of wax in certain areas of the base. When the wax dries you are ready for summer storage. There is no need to scrape the bases of the excess wax. Actually the excess wax will help protect the bases. Then you just scrape the wax next fall and you are set to go.

Link to comment
Share on other sites

I agree with so haaad. Protects the skis and snowboards. I used to put on specific storage wax that had to be scraped off in the fall and then put a true glide wax on for the first ride or ski. Now I just put on a wide range glide wax (for me, Fast Wax Blue) and in the fall scrape and go. Not as pure a base protection, but lots more convenient.

Link to comment
Share on other sites

I bought new cross country skis last year (Fisher) and didn't do a thing for storage. They're working just fine this year and all that I use is a wet glide wax available at REI. Do I really need to worry about all of this scraping and what not, or can I just toss on a final coat of glide wax before storage?

Link to comment
Share on other sites

I bought new cross country skis last year (Fisher) and didn't do a thing for storage. They're working just fine this year and all that I use is a wet glide wax available at REI. Do I really need to worry about all of this scraping and what not, or can I just toss on a final coat of glide wax before storage?

Did you use them last year or did you just purchase them and put them away until this winter?

I have been skate skiing for 10+ years and have always done my waxing. At the end of every season I do exactly whats been mentioned. Take one of the wider ranging waxes and melt on a nice, even and thick coat. If the temperature is right the following winter I will take it off and head right for the trails otherwise I take the wax off and put on another type of wax for the weather.

I know in years past I have not put enough wax on and the skis will appear to be oxidized (turning white from during out). I am not sure if is good for the skis so from now on I make sure I have plenty on to not have to worry.

Link to comment
Share on other sites

I skied quite a bit last winter. After the last trip, I just put them up in the rafters of my garage. I've been skiing a couple mornings a week all this winter (just went again this morning). I just put on a fresh coat of wax every other outing and things seem to work out great. Although, I'm not using the melt-on type of waxes. Just one that comes in a bottle with a foam applicator on top.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.