Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

floro vs mono


hawghunter

Recommended Posts

Does a fluorocarbon line make good lindy-rigs? You would think so because of its invisibility but what about the fact that it is a sinking line? to me that’s asking for constant hook cleaning in soft bottom situations.

what’s your opinion or experience?

Link to comment
Share on other sites

I've tried flouro leaders and flouro live bait rigs, and the only time I use them now are in really clear water with really spooky fish. I use copolymer line now for most situations where I used to use mono.

+1

Link to comment
Share on other sites

I use Vanish as well on all my rigs. They say it's very abrasion resistant and I pull across alot of sand & gravel bottoms and haven't had problems yet with the line. As far as keeping hooks clean on soft bottom just run a float a little ways back on the rig (not all the way back) it will keep your hook just skimming the bottom. The reason I say this is I use Lindy No Snags And I've had that problem. I just needed to ajust the float on the line till I had the hook trailing where I wanted it.

Link to comment
Share on other sites

could someone explain the difference between flourocarbon and mono

Mono = softer (more limp), floats, stretches a lot, is visible in the water

Flouro = stiffer (more likely to jump off the spool), sinks, doesn't stretch much so has better sensitivity, is virtually invisible in the water

Copolymer = similar to mono but with new technology in the manufacturing process that blends the best qualities of mono and flouro and blends them together in 1 line

For me, I really don't use mono anymore (I use copolymer in place of mono). I use flourocarbon at times, but in really specific situations (I don't think flouro is a good all-purpose line).

Link to comment
Share on other sites

Last year I spooled Gama 6Lb (copolymer) on a few rodds. Really like it. I found it to be more sensitive and it appears to be strong. It is a bit more expensive but I think it is worth it. I will be giving it a good test next week on pool 4.

Link to comment
Share on other sites

Fluoro also lasts alot longer than mono. I have 6# fluoro on one of my reels and it is still like new after 5 years, could get only 2 years on mono of that type of reel.

I am in the process of respooling all of my main reels to either all fluoro or superline with a fluoro leader. More expensive up front but actualy cheaper in the long run.

Steve

Link to comment
Share on other sites

Fluorocarbon is nearly invisible under water, has lower water absorbsion which means stronger knots and a longer life once on the spool, and has less stretch than mono which is almost always good. Monofilament is not nearly invisible, but in some situations this is ok. Mono absorbs both water and uva and uvb rays which make it become brittle over time. Mono also has the highest stretch value of any type of line. Those are the differences. I would discount the "sinking" effect of fluoro as it is virtually irrelevant in fishing applications. It may sound like i am pushing fluoro, but i am not. Both have their benefits in the right situation. Hope this helps.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.