Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Catfishing


Anthosunie

Recommended Posts

google mn dnr catfish ponds and you will get close enough to the fin program pages. they have stocked catfish throughout various places in and around the cities. part of my new years resolution in learning how to link sites. it is only jan. 19th so this is as far as can get you right now.

Link to comment
Share on other sites

Be careful on the rivers. Very careful. Like so careful, I wouldn't even try it except in places like the Croix in Bayport and Lake Pepin.

Where are you located at? I know there are a couple lakes in Eagan and St. Paul that were stocked with cats. Never caught one, but never really tried either.

Link to comment
Share on other sites

first off welcome to the HSO family there are a bunch of great guys/gals on these forums.alot of good info here

Ive fished the Minnesota river with little to no luck for cats but I have caught eyes in the river thou..

As stated before be very very carefull on the river in the winter, one wrong step and the out come could be very bad.

I've been fishing the Horseshoe Chain near Richmond with some sucess. I havent really fished to many of the city lakes for kittys but I'm sure that with some perservirance and paitence they can be found there.

Dont forget to check out the COOL CATS 2010 at the Horseshoe Chain March 6th its a Get together for a bunch of us..

click here

Link to comment
Share on other sites

So the past week I went out twice on the croix at Bayport with no success. Bobbymalone you mention about some lakes around Eagan that were stocked with Cats, would you mind telling me which lakes? That would be great. If I cant find any lakes around the Twin Cities I might give Horseshoe Lake a try although its a bit of a drive. Do you guys know how safe the ice is out there and how the bites been?

Thanks

Anthony

Link to comment
Share on other sites

Anthony-

Welcome to fishing minnesota!! I believe the lake he is referring is probably Fish Lake in Eagan. There are lots of cats in there. grin I have caught a few during soft water but haven't chased them when the water is hard. It's a pretty small lake so it shouldn't be to over whelming to start from scratch. Good Luck and let me know how you do...

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.