Jiffy Model 30 exploded view

[perchking]

I have had my trusty model 30 for many years and heading out fishing this morning only to find out my linkage for the throttle is some how missing. I don't know what I am missing that is the hard part. It is either a spring or some-type of linkage that connect the throttle lever to the actual throttle on the bottom side of the auger. Does anyone know where I can find a exploded view of the model 30's?

Please help spring is coming way to soon to be in this predicament...

[Jameson]

Sorry, no exploded view to share...

But I once had part of the linkage disappear on mine also. If memory serves right I was able to get by (till Spring) hooking a steal leader to something by the carb, and than tying the leader to the throttle bar.

Good Luck!

[perchking]

I just need to take a look one to see what I am missing. If anybody has any free time and has a model 30 if you can please take a pic of the linkage it would be greatly appreciated. It is right under the gas tank.

Thanks,

PK

[Far-I]

http://jiffyonice.com/Jiffy30SeriesManual.pdf

page 6

[perchking]

Thanks Far-I but if you look at the pic on page 4 that shows the carb, the top left part of the pic is the throttle that I need to connect to the throttle lever. Nothing is missing from the throttle linkage but I need to connect the throttle linkage to the throttle body which I assume is a spring but I cant figure out how to connect the 2. Like I said a picture of that area will tell me exactly what I am missing.

If anyone has a pic of that area it would be greatly appreciated.

Thanks,

PK

[gonefishing70]

Here is a couple of pic's of my older jiffy model 30 hard to get a good pic hope this helps. if you ae missing the spring it hooks on the top of the carb in the rear.

[perchking]

Gonefishing70, that is exactly what I needed thank you so much. Yes I am just missing that spring... NOW I just need to find a spring with that will fit my application.

I really appreciate it..

PK