mnhunter79 Posted October 26, 2009 Share Posted October 26, 2009 So, i bought a Brand new mossberg slug barrel for my mossberg 500 pump. The barrel is 24", ported, fully rifled, with adj. rifle sights.Went to sight it in on sat. Got the windage right on. BUT, the elevation is a diff. story.Tried moving the rear sight all the way up and down. and all points inbetween. At 25 & 50 yards, with the rear sight all the way back (down) , the gun shoots 15" high. with the rear sight all the way up, i cant even hit the target.Tried hornady, federal, winchester, and lightfield sabot slugs. Did i get a bad barrel? Dont know what else to do. HELP PLEASE. Quote Link to comment Share on other sites More sharing options...
LOTWSvirgin Posted October 26, 2009 Share Posted October 26, 2009 Just a stupid question are you shooting 2 3/4 or 3 and what ounce?? Quote Link to comment Share on other sites More sharing options...
mnhunter79 Posted October 26, 2009 Author Share Posted October 26, 2009 2 3/4" , tried 1 and 3/4 oz. no matter what i do, it shoots high. Quote Link to comment Share on other sites More sharing options...
96trigger Posted October 26, 2009 Share Posted October 26, 2009 Where you on a bench? So many variables can play into account for elevation when it comes to holding it in place, free hand, off a bench, etc.... Quote Link to comment Share on other sites More sharing options...
picksbigwagon Posted October 26, 2009 Share Posted October 26, 2009 so when the back ramp was all the way down it was still 15" high? I would call mossberg and tell them the problem, sounds like something was mounted too high like the front post.....(I am sitting here with one finger in front and two fingers making the V for the back sight)on a bench, were you holding the forearm tight to the sandbags or leadsled?can you return it and try another one? I know that sounds expensive (ammo wise) but I am guessing that something is not right with those sights, it is not the barrel Quote Link to comment Share on other sites More sharing options...
mnhunter79 Posted October 26, 2009 Author Share Posted October 26, 2009 Ya i was using a rest and was holding the forearm like i would in the field. and yes, the rear sight was all the way back. Quote Link to comment Share on other sites More sharing options...
HeviShot Posted October 26, 2009 Share Posted October 26, 2009 Bring the gun back to where you bought it and they will give you a new gun. I have seen this a couple different times and we have replaced the gun and sent it back to the company as a store defect. Quote Link to comment Share on other sites More sharing options...
mnhunter79 Posted October 26, 2009 Author Share Posted October 26, 2009 Bad part is, i bought the gun from a friend and bought the barrel from gander mnt. Called gander and they said call mossberg, it is used, cannot return. ([PoorWordUsage]) in my mind. Quote Link to comment Share on other sites More sharing options...
mnhunter79 Posted October 26, 2009 Author Share Posted October 26, 2009 thanks for moving this!? i put in the deer section cause there is alot more viewers on there. thanks again Quote Link to comment Share on other sites More sharing options...
picksbigwagon Posted October 26, 2009 Share Posted October 26, 2009 I moved it here since this is a new forum on shooting and guns. you have a gun issue here, and yes I agree that gander should have stood behind their sale better than that. Quote Link to comment Share on other sites More sharing options...
96trigger Posted October 27, 2009 Share Posted October 27, 2009 A similar problem happened with a relative of mine and a stoeger shotgun, he bought it, shot it twice it fell apart, it was used, they didn't want to stand behind it at all, he talked to the manager and got a new stoeger. You might have to get a little bit nasty with them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.