Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

Was in Cabelas lookin for a good varmint gun. Havent bought a rifle for a while and I now ammo has went up. But, OMG some ammo prices are outrageous. There was virtually no 22-250 ammo on the shelf. The few boxes left were more than a buck a bullet. Even the 17 cal. stuff was up there. I would almost feel guilty about goin out shootin a couple boxes.The ammo companies have to be makin a killing on this stuff. I know people think Obama(he cant do it himself) is going to ban guns, ammo, etc, but this is gettin ridiculous

Link to comment
Share on other sites

have you used an RCBS chargemaster? I love mine, and I still am paying for it with each reload.....of course I can accurately reload my ammo and do it faster....

I agree with you paul, my better half doesn't count her purses as unneccesary, so why should I count reloading supplies $$$

If you are tired of paying high prices, look into reloading. It is not that hard to do, you just have to pay attention to the particulars....

If I was gonna get anything new for reloading right now it would be the Lee breech lock press, but my turret press works extremely well as a single stage press

Link to comment
Share on other sites

I thought reloading would be cheaper also, I was wrong. Let me explain, when you reload you will shoot more- testing loads, powders, bullets, speeds, lengths, guns. By shooting more you reload more so you shoot more. i started reloading so I could shoot more economically, now I shoot more so I can reload.

Link to comment
Share on other sites

Pic, nah, I use the old Rock chucker, 5-10 scale, conventional tube type powder thrower and trickler. I tack welded 2 deburring tools to a 2 inch angle iron, one with the inside & one with the outside facing to me and the Lee trim tool & I put it in a small table vise. Then after case trimmin I just give the drill a tap on both the deburrers. I can send ya a pic of it if you like. Plus I use the Lee primer tool/dish. I like the "feel" while seating them. I kinda got into a annual ritual years ago on the 4th of July. Mid June I tumble all my brass in an old Thumbler Tumbler, clean it and resize it. Then on the 4th I case trim & reload the .243, 06 & .270. I just laze the day away in my little corner of my re-loading room in my barn. As dependable as my equipment has been I see no reason to get into the elec powder measurers. I kinda like the solitude that day affords me and I really don't want any distractions while I'm doing it. I've got a checklist that I follow as close as those we used in the military. One year I was called to the house. 'bout and hour later I went back and started loading powder when I noticed a few grains were dribbled on the table top and loading block. I looked at my checklist and saw I missed sinkin the PRIMERS IN. Luckily I only had 10 or so. loaded.

Link to comment
Share on other sites

ya know, Pic, we hear so much stuff on how people do things or use things that it is far beyond me to tell some how to or what to use. That includes, calibers, brand name guns, scopes, bi-nocs, etc. The best thing in the world is the stuff that a guy makes work for him and if sharing one's experiences or opinions or procedures then we are so much better off, collectively. I think I could just about guess the age of some who ask questions and that's a good thing. A younger person just starting off or interested in our fisheries and wildlife can garner a truck load of info from the more experienced folks here.

Link to comment
Share on other sites

well said Paul, I completely agree. My school district just started a trap shooting team at the High School, which I think is one of the best things I have heard in a long time....I am sure there will be negative comments from those people who feel anyone one with a gun is going to kill people, but there is just no discussing it with some of them.

Harvey, I blame you for the $49 box of Black Hills Blue box 223 remanufactured ammo I saw at gander last night. I did see and handle a Browning BPS 20ga at the store that sure seemed purdy.....

Link to comment
Share on other sites

I simply got my ammo before the prices went crazy. Yes, I probably did contribute to the high prices but I still got mine before it went up.

For what I purchased my ammo for, anyone would have. They must not have wanted to store it all of late winter and summer. I just happenned to be at the right place at the right time. I could not walk by the pricing they offered.

The prices were great. I bought enough 300 mag and 7mm to get me to the end of my time. I can also shoot yotes for a long time with my 223 also.

Link to comment
Share on other sites

Yep, been reloading for 34 yrs, Probably have not saved allot just because of shooting more. It would be pretty tough for me to justify spending a grand on ammo to go out dog hunting for five days, But I can handle the $350 or so it cost me when reloading.

I am also using my all my old RCBS equipment. Press, dies, powder measure, scale, trimmer, deburrer, hand primer. I have started using Hornady One Shot for lubing the cases. What a concept, it is great!!!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.