Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

HELP......How to wire 12 volt and 110 volt for wheelhouse?


deaceye

Recommended Posts

Hello,

I need help on wiring my wheelhouse. I already use 12 volt wiring for furnace, lights etc. How would I add a few 110 volt outlets? I am sure I would need to run a generator then right? Would I also need an inverter? I really need help, thanks.

Link to comment
Share on other sites

Deaceye,

In my wheelhouse the 110 is only powered when using a generator. There is a female plug on the outside to attach an extention cord from the generator or shore power (your house when parked at home,etc). All the 110 outlets and a set of 110 lights are all wired off that female plug. Your other lights, furnace, car stereo, etc will be powered off your battery. Put a 12v cig lighter outlet near to where your tv (or future tv) is going to be placed to more easily plug in an inverter for when you are not using generator power.

Here is a tip...put a 110 outlet near where your battery is going to sit so you can easily plug in a battery charger to charge the battery when you are running a generator.

I actually use two 12v batteries. One for the furnace only (most important!) and the second for the lights and radio.

Hope that helps.

Link to comment
Share on other sites

Glockwinger, what is the purpose of having two separate batteries for running the furnace and lights? Does it somehow conserve power? - I use two batteries, hook one up for everything and when that runs out I switch over to the second.

Also the 12 volt that comes out of a generator for charging is unregulated power. I have been told that it works, but it is not good for the battery. The best option is to run an onboard charger off of the 110 power to your battery like some of the others said.

Link to comment
Share on other sites

Glockwinger, what is the purpose of having two separate batteries for running the furnace and lights? Does it somehow conserve power? - I use two batteries, hook one up for everything and when that runs out I switch over to the second.

Also the 12 volt that comes out of a generator for charging is unregulated power. I have been told that it works, but it is not good for the battery. The best option is to run an onboard charger off of the 110 power to your battery like some of the others said.

Link to comment
Share on other sites

The two battery thing is just something I do, not that it is the correct thing to do...I am open to suggestions if there is a more efficient way, I'm still learning the best ways to live out of the ol' shack.

I have run down the "accessory" battery before and was glad to have the furnace battery on it's own (accidently left the outside light on...oops!) I have an on board trickle charger for when I do run the generator to juice up both batteries.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.