Vex Mod

[Jordyn Kaufer]

Well i saw this on another forum but i think this is sick!!!!

it took me maybe 10 minutes to do and its gonna help me a lot.

[Jordyn Kaufer]

heres a picture with rods in it

i think its gonna work out pretty slick when it gets put to use

[Sonicrunch]

That wont work.

[Jordyn Kaufer]

why not.......?

[Sonicrunch]

I'm just teasing

[B-man715]

I think he's pulling your leg a little- see the winking smiley?

That should work out just fine

[JimBuck]

Is that 1.5" PVC? I have some spare from the rod holders I made for the boat that would work great for this. Nice idea and thanks for sharing.

[Jordyn Kaufer]

haha ok i thought you were teasin.

JimBuck, i think it was 1 1/4in but im sure 1.5 will be just fine.

what i did was i drilled a hole in the PVC so i could fit the screw head all the way through and then just screw in the on side of the PVC so it wouldnt restrict the rod going through.

[Ed Carlson]

Functional..Yup..I like it!

Maybe router a notch on the top of the tubes so the reels sit tight in a slot so they do not rotate and try to tangle?

If you angle the notch a bit, it may help lock the real stems in place and keep the reels from trying to jump out if you hit a bump?

The Blue Genz Box is adaptable, it lends itself to Tweaks preaty easily...always like that about it.

[gunmunky]

I have a board mounted on the back rack on my ATV with pvc tubes for holding rods. It works great when hole hopping and you're not in the house. Great minds think alike.