Scott Stein Posted February 28, 2009 Share Posted February 28, 2009 So CourtlandKid,Tyler23 and a bunch of other guys went riding today. We were screwin around on a buddies private lake,when I was gunna hit a drift I clamped on it and it sounded like it fouled a plug and then died. I went to start it and the rope was tight. You can still move the primary clutch back and forth about 2-3 inches. It does have a sleeve in it,not sure which cylinder. Thinkin maybe the rod broke? What do you guys think? It's a 99 SuperSport 550 Quote Link to comment Share on other sites More sharing options...
eyestogills Posted March 2, 2009 Share Posted March 2, 2009 sounds like a rod. or a cracked sleeve. If you still have some movement it might not be to bad to fix. Quote Link to comment Share on other sites More sharing options...
leech~~ Posted March 4, 2009 Share Posted March 4, 2009 Scott, i've had an engine cylinder cease up when running on lakes a few times on different sleds, and after cooling down a few minutes there was some movement. 2 of them I actually got to restart and drove off the lake, but had to rebuild the cylinder. Do a compression check if you can get it to turn over? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.