Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Mounting price's?


Rywheat

Recommended Posts

I have heard as a general its about $10 an inch. I have only caught 1 worth the wall, a 2lb 8oz crappie. It went a touch under 16" and was $145 on a piece of driftwood.
Hope this helps
Kyle

Link to comment
Share on other sites

I have seen anywhere from $6.50 - $10.00 an inch for a skin mount. The "you get what you pay for" phrase seems to go along with taxidermy, IHO. You really have to look over what the taxidermist has done, because that is pretty much how your mount will look.

Link to comment
Share on other sites

Yes, $6.50 an inch. Last year at some sports show in Alexandria there was a guy there that charged $6.50 in. His work was pretty good too. He hand carves his panfish forms and they are some of the best that I have seen. He was only in taxidermy for a couple of years and that is why the cheap price. Unfortunately, I lost his card after I went to Red Lake and brought back two 14" crappies. I thought instead of filleting them out, why not do a mount for less than $200. I have searched my entire house for his name and number and no luck. My uncle has a fish at a taxidermist right now for $7/in. That guy is in Wheaton. The guys outstate seem to be less.

Link to comment
Share on other sites

I agree, get out of the metro and will find prices which are much more reasonable. I would never pay over $8 an inch. You get what you pay for...I would disagree. You pay what you "think" you are suppose to pay. Lots of good taxidermists live outside the metro...take a look. You might save yourself a bundle!

Link to comment
Share on other sites

I brought my walleye to North Country Taxi. and I looked at all of his work prior to leaving this fish with him. He does absolutely great work and he charged $6.95/inch. I went for the "S" curve so that was an extra $1.00/inch. Then it was like $30 for a piece of driftwood. He was backed up to about 7-9 months when I went in. If I get any more monsters he'll be getting my business again and I refer everyone that asks me to him. Great guy, great work, great prices! Can't beat that!

Link to comment
Share on other sites

Bushwackers guy in Wheaton is Johnson's Taxidermy, I had a walleye done there 11 years ago, it still looks good. I have seen a lot of his work in peoples homes..his fish and deer mounts are good and they stay looking good over time. His fish mounts don't have that shiny varnish look...I don't care for that. He has always been reasonable.

Link to comment
Share on other sites

The best way to judge a taxidermist is by his backlog. If it takes a month or two to get your mount back the demand for the taxidermists service are not very great.

Generally the best taxidermists get more work thean they know what to do with through word of mouth and don't need to advertise.

You do get what you pay for when it comes to taxidermy.

Link to comment
Share on other sites

It isn't so important the cost now it is what they will look like in 20 years. You want to find someone with lots of experience and see some of their past work. Or find someone that has had one for a long time. That is why I am all for replicas they look the same today as they will 20 years from now. I shot a good buck this past year and I know I didn't use the cheapest tax. but I work with a guy that has used this tax. for all his mounts and some of them are over 15 years old and still look new.

------------------
Grip it and Rip it

IFFWalleyes
I Fish For Walleyes
[email protected]

Link to comment
Share on other sites

I'll put a vote in for Johnson's in Wheaton. He does a great job and his shop is FULL of his stuff so if you want to take a look at his work before you use him there is plenty to look at. He did my Walleye about 7 yrs ago and it still looks like I just picked it up.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.