Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

fished Big Round today not allot doing fish were very finicky.Ended up with a half dozen 5 gills 1 perch all were nice fish and more than keep able. fish the NE corner about 100 yards from shore.

Link to comment
Share on other sites

Fished Big Round again this morning ended up with 20 nice gills , again we were along the NE shoreline . Kind of out in front of a red cabin and a green boat house with a white door on it about 100 yards out.About 930 they just stopped.

Link to comment
Share on other sites

very few people out there in the morning only a hand full and hardly any when we left at 10am. They must have come later in the afternoon.There was Justus and one other truck on the ne shoreline.

Link to comment
Share on other sites

Kingfisher1; once the weeds start up a good tactic is to find open pockets in the weeds and drop a large sucker or shiner in with a slip float. You'll have to keep and eye on it to keep it from going into the weeds. Try to keep the float as centered as possible in the pocket. Hope this helps and GL.

Link to comment
Share on other sites

There were quite a few people fishing the south end of Big Round today. There were a couple 4 wheelers out there and a small pick-up truck. It was kind of funny actually. The guy in the pick-up drove across the lake, stopped, drilled a couple holes and then drove off the lake. I think he must of determined there wasn't enough ice for his liking.

Link to comment
Share on other sites

was on Big Round this morning and the gill fishing was great ! Size fantastic. Only kept the males put all females back in. We used leech's and crawlers with a slip bobber and chartreuse hooks. Was fishing the NE corner of the lake.

Link to comment
Share on other sites

We were on Big Round Sunday and it was fantastic again for gills! 2 Bonus Walleye as well. Slip Bobbers with leeches & crawlers is what we've been using for over 30 years, and it never fails. The landing is terrible as usual. I'm tired of people power loading!!!

Link to comment
Share on other sites

was on Big Round again this morning from 5am until 9 . Between my son and I we caught 26 nice big gills. Through most of the females back unless they were hooked bad and bleeding. Fished the NE corner again moved around until we found a hole out of the weeds and thats where they were in about 10-11 fow.

Link to comment
Share on other sites

Great report vman. Are the walleyes decent sized in there. I have caught those big gills you keep speaking of in years past but haven't had much luck on the eyes. Whats the trick? Do you know if they are using suckers or shiners? Might have to make a few stops on that lake again.

Link to comment
Share on other sites

finding them and then not sticking with one color jig try them all. Yesterday afternoon it was purple glitter jigs and you had to let the waxie just hang down off the tip of the hook but keeping the tip covered. Seemed right at dark or shortly after is when we started seeing the tip up lites around us.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.