Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Walley rod


montana49er

Question

Im looking a getting a good walley rod. I fish a lot of spinners and lindy rigs. just seeing what people think is the best for that type of fishing? I also like to jig and i'm not sure if i should use the same rod? thanks josh

Link to comment
Share on other sites

5 answers to this question

Recommended Posts

  • 0

Depends on your budget. You can use a 6ft 6" or a 7ft medium weight fast tip rod for both rigging and jigging . Limit Creek has a nice rod called the Smoothie which handles double duty well and runs under $90. I prefer to use a shorter rod for jigging. St Croix Avid 6ft 3 extra fast is my current rod. I have a Limit Creek 8ft telescoping rod that is great for rigging and should be good for slip bobbers too. In mid 100s you have the Jason Mitchell rods and St Croix Avids which you can't go wrong with. Limit Creek and Jason Mitchell are sponsors so you can find them in the sponsor area. Or a throwing a bone to Dietz, check out the Shimano Crucials or Convergence rods. My 3 way setup is a Shimano baitcaster paired with a 7ft Crucial medium fast.

Link to comment
Share on other sites

  • 0

Or get a 6 foot medium action lightning rod for cheap and use it for everything, I fish a lot of different ways and i know rods are built differently for different types of fishing. But it's a nice rod and does the job just fine for both types you stated.

Link to comment
Share on other sites

  • 0

Here are a couple options depending on your price range.

Expensive

-G. Loomis IMX 6'6" Light, Fast - Great feel for lindy, jigging and spinners

-St. Croix Avid 6'6" Medium Light, Fast - Also very nice for Lindy, jigging, and spinners

Mid-Range

- Shimano Crucial 7' Medium Light, Fast - I just bought the 7'2" for bobbers and love it. Might be better for lindy and spinners, I like shorter for jigging.

- G. Loomis GL2 rods

- Fenwick makes nice rods, but I would stick to Medium or Medium light for any lindy or jigging rod. You want the sensitivity.

- Cabela's has some nice rods for this as well.

Price Conscious

- St. Croix Triumph

- Cabela's Fish Eagle II

- Gander Mtn. Guide series

- Shimano has some nice combo's in this category.

The long and the short of it is that a 6'6" medium light - medium, fast action rod would be the way to go.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.