larryd Posted March 1, 2008 Share Posted March 1, 2008 will the vexliar magnifier work on the LX5 to keep some of the water out? Quote Link to comment Share on other sites More sharing options...
Dave Posted March 1, 2008 Share Posted March 1, 2008 I don't believe so. There was another thread in the past where someone had modified one to fit it, however. Quote Link to comment Share on other sites More sharing options...
frogtosser Posted March 1, 2008 Share Posted March 1, 2008 you could just put some plastic wrap over it and hold it with a rubber band. that would keep water out. Quote Link to comment Share on other sites More sharing options...
CNY-Kyle Posted March 2, 2008 Share Posted March 2, 2008 Yes the vex cover will fit the Marcum unit with some modification...You need a dremel tool and will simply file the bumps on the inside of the cover since the marcum face is a bit smaller. Just sand a little bit and give is a fit test...then a bit more til it fits nice and snug. You go to fast you can grind to much of the cover and it will fit loosly and wil fall and be blown off. Hope it helps. Quote Link to comment Share on other sites More sharing options...
larryd Posted March 2, 2008 Author Share Posted March 2, 2008 thanks kyle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.