Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

3M chemical found in nine more metro lakes


Tom7227

Recommended Posts

3M chemical found in nine more metro lakes

Stormwater runoff could be behind the elevated levels of PFOS; 11 other lakes studied showed little or no trace of it.

By TOM MEERSMAN, Star Tribune

Last update: January 30, 2008 - 6:43 AM

A chemical formerly manufactured by 3M has been found at elevated levels in nine more metro area lakes, according to a study released Tuesday, and is likely entering the waters through stormwater runoff.

The Minnesota Pollution Control Agency (MPCA) collected 381 fish from 20 lakes and two river reaches last spring and summer. They were analyzed them for PFOS (perfluorooctane sulfonate) and related compounds. 3M manufactured the chemical for decades for use in Scotchgard, firefighting foams and other products before ceasing production in 2002.

The metro lakes study began after the surprise discovery last spring of relatively high levels of PFOS in bluegills from Lake Calhoun in Minneapolis. Scientists couldn't explain the source of the contamination, because the lake is not near any known areas where 3M manufactured or disposed of the chemical.

The findings of the latest study are mixed, said Paul Hoff, MPCA supervisor of environmental reporting and special studies.

Three lakes in Minneapolis and six in surrounding counties contained fish with PFOS levels "high enough to possibly be of concern," said Hoff, while 11 other lakes showed little or no trace of the chemical.

The inconsistent results mean that the source of PFOS is probably not from air emissions from 3M's manufacturing plant in Cottage Grove, he said.

"We're pretty certain that the higher levels are attributable to something specific in the watershed of those lakes that came in via stormwater runoff," Hoff said. The PFOS might have entered the system long ago or in more recent months, he said, and may have come from firefighting foam residue, the chrome plating industry or various consumer products ranging from older water- and grease-resistant coatings, lubricants and hydraulic fluids.

Hoff said the next step is to study what drains into the lakes of concern and how PFOS moves through the food chain. It is widely known to accumulate in blood and does not break down in the environment.

State health officials said in a statement that they will evaluate the new MPCA fish data and determine whether additional warnings about fish consumption will be issued. In April, authorities advised anglers to eat no more than one meal per month of bluegills taken from Calhoun and four connecting lakes. They stressed that although the fish contained high levels of PFOS, the chemical was present at extremely low levels in the lakes' waters and posed no risks for swimmers, boaters and pets.

The lakes with elevated levels of PFOS in fish are: Lake Johanna (Arden Hills), Cedar (Minneapolis), Harriet, Hiawatha, Jane, Keller, Powers, Red Rock and Tanners.

Waters with little or no trace of PFOS are Cedar (Scott County), Centerville, Colby, Green Mountain, Hydes, Independence, Nokomis, Peltier, Upper Prior, Sarah and Silver.

Fish from Lake Minnetonka and Lake Josephine were also tested, but those results are not available yet. Hoff said that lakes were selected for testing based mainly on their popularity for fishing, and that PFOS tends to accumulate in bluegills, crappies and bass more than northern pike and walleye. He said that fish were also collected from lakes around the state last summer as part of mercury studies and that some will be analyzed for PFOS for comparison with urban lakes.

Tom Meersman • 612-673-7388

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.