Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Input on fiber optic shotgun sights


Cooter

Recommended Posts

The set on my shotgun just isn't reliable anymore so I'm gonna replace them before spring. Any recommendations? It will be going on an 870 rib. I'm more concerned about toughness than easy on/off because it will probably stay on all year. Something that isn't gonna shift on me.

Link to comment
Share on other sites

I've got a set of the Tru-Glo's that I really like. They're the kind that you can adjust BOTH windage and elevation. I don't trust the others. They clamp on front and rear with allen screws, so I think with some loc-tite they're pretty rugged. I've had mine on for 4 years now and I'm out quite a bit in the spring. I think I picked mine up in the bargain cave at Cabelas for around $40.

I personally don't care for the tri-viz, or hoop style sights, or much else. I don't like to draw too much attention on the rear sight as it's distracting to me.

Any reason you wouldn't try a scope? That's what I'm looking into.

My last miss was 3 years ago. That day also included my first miss, each were two hours apart, both on mature gobblers. I know why I missed both of those birds, and I feel like a scope would've helped in both situations.

The first bird was simply too far away, and I misjudged distance due to dips in the field between the gobbler and I. Where I hunt, fields are never flat, even though compared to the rest of the landscape, they appear as such. The bird was slightly uphill over a large planted cornfield (plants hadn't come up yet). Two low spots in the field between myself and the gobbler made him look to my eyes about 45 yards, esp. when he was in full-strut. With one of the diamond reticles however, you realize that the birds head/neck area aren't filling up that diamond. With a little practice, you'd be able to determine whether or not a shot was too far away.

The second bird was spotted while peeking over another hump in a different field two hours later. I backed off and called, waited, and called some more. Surely he'd come, he was only 75 yards away, if that. Well, he did, but he didn't close the straight-line distance, he sashayed to my right, and followed a draw in the field about 30 yards to my right hand side. Being a right handed shooter, I was already twisted as far to the right as I could be. Those sights looked aligned to me, but I was torqued so far to the right, my cheek was probably well off the stock, and aligment from center as well.

All that said, I think I would've had a hard time acquiring the target and firing quickly with a scope for last year's MN bird.

More often than not, I'll take better sighting rather than fast acquisition, as most hunters (myself included) encounter situations where quick-firing is not only rare, but unsafe and unethical.

Of course, all this is theoretical (I've never killed a turkey with a scoped gun), and based off of the experience of others, so give it a try this year and let me know how it works :).

Probably more than you wanted to read.

Joel

Link to comment
Share on other sites

I also have the Tru Glo, I believe it is called the Gobble Dot. I'm sure this is the same jnelson is talking about. I really like it. I have used it for 3-4 years without it moving on me.

A buddy uses a Red Dot Scope and claimes it doesn't let in enough light to be useable early in the morning.

A regular scope might be the way to go, except for the huge recoil of the turkey loads. Will they loosen? I don't know. I do know I'd hate to get bit by a scope with that reciol. eek.gif

Link to comment
Share on other sites

The gun I bought last year came with a red dot scope, and I elected not to put it on. First, I am not scope seasoned. I don't deer hunt and would feel very uncomfortable limiting my sight lines (even though I am a one-eyed shooter). Seems like a good way to accidently kill two birds in one shot. Second, all I had to do was take it outside in 6:00 AM light and look through it. No thanks, not enough light gathering to it. I am sure a more expensive version could serve well, but it would take too much time to adjust to it.

Last year was the first year I used a gun with fiber optic sights. I like it. Every time I mounted the gun from day one, I instinctually lined up the sights. And, that's coming from a guy that is a self-declared peeker. I really ought to hold a piece of steel in my mouth and mount a magnet on my stock. The sights have helped me minimize this bad habit.

Link to comment
Share on other sites

I have tried fiber optic sights on a muzzleloader for deer and a shotgun for turkey and have broken the front fiber optic on both while banging around in the brush. I put a scope on my turkey gun for my last hunt and could see turkeys on the roost at over 100 yards. With the reticle on my scope I also have an accurate on gun range finder and know when the tom is in range. I use a raised cheek pad to get better eye alignment and cheek contact with a scoped shotgun.

I still use fiber optic sights on my muzzleloader but i was real picky about finding the one I thought was going be least likely to get broken.

Link to comment
Share on other sites

The tru glo mag gobble dot are pretty good. However my favorite is the William's Firesights. They are bright and rock solid. Adjustable for elevation and windage. Basically they are rifle sites that clamp onto your shotgun's vented rib.

Link to comment
Share on other sites

Cooter, you won't have a problem with TruGlo dots on that 870 Rib. I love those sights, it didn't take long and I found myself looking for that green dot every time I brought the gun to my shoulder.

I go with red on the turkey hunts and green for duck and upland hunting .

I did break one TruGlo sight a couple years ago when I forgot to take it off the rib when I cased the gun (not the pro series permanent mount). Since then I've always taken the sight off and put it in its own case; the magnetic style sights are like twenty bucks. They just clamp on, obviously they can't be changed for elevation or windage. But the permanent ones (Pro Series) with the allen screws are pretty nifty; they can be sighted in and adjusted. Sounds like they would be tough to wreck, and not too spendy at like fifty bucks. Another turkey hunting friend of mine swears by those pro series sights.

Fiber optic sights, it's amazing how military technology and scientific discovery change the outdoor product landscape. Who woulda thunk it?

Good luck this spring.

Link to comment
Share on other sites

Was also going to mention my preference for a "finer" front post. I trashed the first fiber optic site I had in favor of the tru-glo, as it didn't cover up the front half of the turkey at 40 yards. Something to consider.

Joel

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.