Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lights too Bright?


shooter_mcgavin

Recommended Posts

I gave my new LED lights a try last night, and couldn't believe how bright they were. I've got two 4-foot strips, with a total of 240 led's running off my vexilar battery. Its like daylight in there (6' x 6' frabill). I even noticed that I could see the crappies quite a ways down as I was realing them up. Which leads me to my question:

Is there such a thing as too bright? I was set up pretty deep, but I'd imagine if you're on the weedline, say 18 fow, that the light shining down through the holes might deter a walleye from swimming through.....

Any thoughts?

Link to comment
Share on other sites

Guest Anonymous

For crappies it's not real likely to be a big issue. They are part of he reason the no submerged lights rule in lakes is in effect in MN. They submerge lights down south to attract the forage which in turn attracts the crappies.

Link to comment
Share on other sites

Found them on the net and had them shipped from Hong Kong. Took almost three weeks. I did a lot of searching, and couldn't find anything that's made in the USA that would work. These are not the Best Hong Kong lights or whatever they're called.

I wanted them to be waterproof, flexible, and a 180 degree viewing angle. The only place that I could find them was China. If I post the link it will just be deleted.....

Link to comment
Share on other sites

I don't think it would matter too much to crappies as stated about but I have found in the past that for walleyes the least amount of light seemed to be the best. When I fish walleyes in my portable I jig one line inside with no lights one and a Tip setup not too far away. And if I do get the rare occaision to fish in a permie I usually like to sit with the light off or very dim and just waiting for a rattle reel to sound off.

Link to comment
Share on other sites

I think it may vary lake to lake. I think some lakes, (Green in chisago) light doesnt matter. But a very small lake in Eagan where i fish, all i catch are small ones with the light on. (headlamp) But when I turn it off, I start catching big ones! And surprisingly, the bigger ones are extremely light biters! I often dont know they are there until i jig and feel them there!

Link to comment
Share on other sites

Thanks for the replies. Now that I think of it, the only walleyes I've caught this year were after I broke my lantern and had to use my headlamp.

FishOn - I live in Eagan, but have yet to find a spot worth fishing twice. Any suggestions on some panfish action for an evening? I'm mostly catch & release. Shoot me an email if you would [email protected]

thanks!

Link to comment
Share on other sites

Its funny how it all works! The crappies on green were smacking it, but on the small lake, just the lightest bite ever! Once the sun is completely down, my headlamp goes on the floor facing the wall. That way there is no light getting down the hole but just enough that I can see what im doing!

Link to comment
Share on other sites

Shooter, in regards to eagan there are several great lakes! Fish lake can be outstanding if you get out there in the right spot when there isnt a crowd. carlson is good in the summer and very early ice. We will have to fish sometime and i can be more specific!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.